Analysis of stress-induced Burgers vector anisotropy in pressurized tube specimens of irradiated ferritic-martensitic steels: JFMS and JLF-1

被引:4
作者
Gelles, DS [1 ]
Kimura, A [1 ]
Shibayama, T [1 ]
机构
[1] Battelle Mem Inst, Pacific NW Labs, Richland, WA 99352 USA
来源
EFFECTS OF RADIATION ON MATERIALS: 19TH INTERNATIONAL SYMPOSIUM | 2000年 / 1366卷
关键词
irradiation creep; dislocations; anisotropy; ferritic steel; microstructure;
D O I
10.1520/STP12413S
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
A procedure for determining the Burgers vector anisotropy in irradiated ferritic steels is described, allowing identification of all a < 100 > and all a/2 < 111 > dislocations in a region of interest. The necessary micrographs to apply the procedure have been taken of a pressurized tube specimen of JFMS, a duplex ferritic steel following irradiation in FFTF/MOTA at 407 degrees C to 7.5 x 10(22) n/cm(2) (E > 0.1 MeV) or 37.5 dpa, and a pressurized tube of JLF-1 irradiated at 430 degrees C under similar conditions to 14.3 x 10(22) n/cm(2) (E > 0.1 MeV) or 60 dpa. Analysis of micrographs indicates that large anisotropy in Burgers vector populations develop during irradiation creep.
引用
收藏
页码:535 / 547
页数:3
相关论文
共 9 条
[1]   EFFECTS OF STRESS ON MICROSTRUCTURAL EVOLUTION DURING IRRADIATION [J].
GELLES, DS .
JOURNAL OF NUCLEAR MATERIALS, 1993, 205 :146-161
[2]  
GELLES DS, 1987, ASTM STP, V955, P560
[3]  
GELLES DS, 1985, ASTM STP, V870, P98
[4]  
GELLES DS, 1982, DOEER00458, P343
[5]   IRRADIATION CREEP OF LOW-ACTIVATION FERRITIC STEELS IN FFTF/MOTA [J].
KOHYAMA, A ;
KOHNO, Y ;
ASAKURA, K ;
YOSHINO, M ;
NAMBA, C ;
EIHOLZER, CR .
JOURNAL OF NUCLEAR MATERIALS, 1994, 212 :751-754
[6]  
KOHYAMA A, 1989, FFTFMOTA1988 ANN PRO, P180
[8]   Problems of plastic gliding [J].
Orowan, E .
PROCEEDINGS OF THE PHYSICAL SOCIETY, 1940, 52 :8-22
[9]   Irradiation creep of various ferritic alloys irradiated at ∼400°C in the PFR and FFTF reactors [J].
Toloczko, MB ;
Garner, FA ;
Eiholzer, CR .
JOURNAL OF NUCLEAR MATERIALS, 1998, 258 :1163-1166