Effect of moisture absorption on the mechanical properties of randomly oriented natural fibers/polyester hybrid composite

被引:255
作者
Athijayamani, A. [1 ]
Thiruchitrambalam, M. [2 ]
Natarajan, U. [1 ]
Pazhanivel, B. [3 ]
机构
[1] AC Coll Engn & Technol, Karaikkudi 630004, Tamil Nadu, India
[2] Tamilnadu Coll Engn, Coimbatore 641659, Tamil Nadu, India
[3] Cent Electro Chem Res Inst, Karaikkudi 630006, Tamil Nadu, India
来源
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2009年 / 517卷 / 1-2期
关键词
Polymer-matrix composite; Moisture absorption; Natural fibers; Mechanical properties; Theoretical model; Statistical model; BEHAVIOR; FIBERS;
D O I
10.1016/j.msea.2009.04.027
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
In this work, the variation of mechanical properties such as tensile, flexural, and impact strengths of roselle and sisal fibers hybrid polyester composite at dry and wet conditions were studied. The composites of roselle/sisal polyester-based hybrid composites with different weight% of fibers were prepared. Roselle and sisal fibers at a ratio of 1:1 had been incorporated in unsaturated polyester resin at various fiber lengths. When the fiber content and length of the roselle and sisal fibers were increased, the tensile and flexural strength of the composite increased. When the samples were subjected to moisture environment, decrease in tensile and flexural strength was observed. The maximum percentage of strength reductions in tensile and flexural strength were observed for the composites having the fiber length of 150 mm and 30wt% fiber content. For impact strength, it was with the composites of 20 wt% and 150 mm at wet conditions compared to dry conditions. The percentage of strength reductions increased with fiber content and length in wet conditions. A scatter in the impact strength values was identified on both the conditions. The moisture absorption characteristics of the natural fibers are very important to produce the natural fiber hybrid composite materials with the positive hybrid effect. The experimental results are compared with theoretical and empirical or statistical results and found to be in good agreement. (C) 2009 Elsevier B.V. All rights reserved.
引用
收藏
页码:344 / 353
页数:10
相关论文
共 32 条
[1]  
ALSINA OLS, 2007, POLYM PLAS TECHNOL E, P520
[2]   A STATISTICAL APPROACH FOR DETERMINING THE TECHNOLOGICAL VALUE OF COTTON USING HVI FIBER PROPERTIES [J].
ELMOGAHZY, YE ;
BROUGHTON, R ;
LYNCH, WK .
TEXTILE RESEARCH JOURNAL, 1990, 60 (09) :495-500
[3]  
Ethridge M. D., 1996, P BELTW COTT C, V2, P1314
[4]   Effects of corona discharge and UV treatment on the properties of jute-fibre epoxy composites [J].
Gassan, J ;
Gutowski, VS .
COMPOSITES SCIENCE AND TECHNOLOGY, 2000, 60 (15) :2857-2863
[5]   Effects of environment on the properties of low-density polyethylene composites reinforced with pineapple-leaf fibre [J].
George, J ;
Bhagawan, SS ;
Thomas, S .
COMPOSITES SCIENCE AND TECHNOLOGY, 1998, 58 (09) :1471-1485
[6]  
Hatakeyama H., 1983, J APPL POLYM SCI APP, V37, P979
[7]  
Hunter L., 1988, MELLIAND TEXTILBER, V69, P123
[8]   Mechanical properties of sisal/oil palm hybrid fiber reinforced natural rubber composites [J].
Jacob, M ;
Thomas, S ;
Varughese, KT .
COMPOSITES SCIENCE AND TECHNOLOGY, 2004, 64 (7-8) :955-965
[9]   Mechanical properties of injection-molded isotactic polypropylene/roselle fiber composites [J].
Junkasem, Jirawut ;
Menges, James ;
Supaphol, Pitt .
JOURNAL OF APPLIED POLYMER SCIENCE, 2006, 101 (05) :3291-3300
[10]   Tensile properties and water absorption behavior of bamboo fiber reinforced composites [J].
Kim, HJ ;
Seo, DW ;
Lim, JK ;
Fujii, T .
FRACTURE AND STRENGTH OF SOLIDS VI, PTS 1 AND 2, 2006, 306-308 :417-422