Tribology of confined Fomblin-Z perfluoropolyalkylethers: molecular weight dependence and comparison between unfunctionalized and telechelic chains

The dynamic shear properties of molecularly-thin films of unfunctionalized and end-functionalized (telechelic) Fomblin-Z perfluoropolyalkylether (PFPAE) melts with number-average molecular weight M-n approximate to 3000-4000 g mol(-1) have been studied at shear rates of 10(-2)-10(5) s(-1) at normal pressures of 1 and 3 MPa. The shear responses are compared to measurements on end-functionalized polymers of the same chemical composition but lower molecular weight, M-n approximate to 2000 g mol(-1). The predominantly elastic response and high shear moduli of the confined film of unfunctionalized polymer, Fomblin Z03, suggest that it forms a structure likely to solidify already at low pressure. Its lubricating properties are less favorable than the ones found for hydroxyl- (DOL) and piperonyl-terminated Fomblin-Z (AM2001, AM3001), where associated molecules form a structure less prone to solidification under confinement. The thickness of the compressed films of the end-functionalized polymers increased more strongly with molecular weight than as M-n(0.5). The shear moduli were found to be larger, the higher the molecular weight, indicating slower relaxations. At a normal pressure of 3 MPa, these films solidified and displayed stick-slip as seen already at 1 MPa in the Z03 film. The limiting shear stress of the unfunctionalized Z03, sigma > 3 MPa, exceeded by an order of magnitude the limiting shear stress of all of the end-functionalized polymers. The limiting shear stress of the hydroxyl-terminated polymer was larger than that of the piperonyl-terminated polymer.