The effects of heat treatment on the phase transformation behavior of plasma-sprayed stabilized ZrO2 coatings

被引:132
作者
Moon, J
Choi, H
Kim, H
Lee, C [1 ]
机构
[1] Hanyang Univ, CPRC, Div Mat Sci & Engn, Seoul 133791, South Korea
[2] RIST, Welding & Struct Integr Res Team, Pohang 790600, South Korea
关键词
thermal barrier coating; stabilized zirconia; phase transformation; thermal cycle; oxygen vacancy;
D O I
10.1016/S0257-8972(01)01661-9
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Partially stabilized zirconia (PSZ) is an attractive material for thermal barrier coatings. Zirconia exists in three crystallographic phases: cubic, tetragonal and monoclinic. In particular, the phase transformation of tetragonal to monoclinic is accompanied by significant volume expansion, so this transition generally results in cracking and contributes to the failure of the TBC system. Both plasma-sprayed ZrO2-8Y(2)O(3) (YSZ) and ZrO2-25CeO(2)-2.5Y(2)O(3), (CYSZ) coatings were isothermally heat-treated at 1300 and 1500 degreesC for 100 h and cooled at four different cooling rates. The monoclinic phase was not evident in all CYSZ samples annealed at 1300 and 1500 degreesC. In the 1500 degreesC heat-treated specimens, YSZ contains some monoclinic phase, while none exists in the 1300 degreesC heat-treated YSZ coating. The difference in phase transformation behavior between YSZ and CYSZ results from the degree of stabilization of the initial composition and the various cation radii. For YSZ, the different phase transformation behavior at the two temperatures is due to the stabilizing concentration of high-temperature phases and grain growth. For YSZ annealed at 1500 degreesC for 100 h, the amount of monoclinic phase increased with the slower cooling rate. High oxygen vacancy, formed during high-temperature holding, remained at room temperature due to a fast cooling rate. The extra oxygen vacancy at room temperature displaces an oxygen ion from the equilibrium position in the tetragonal phase and functions as a cubic stabilizer, so the tetragonal-monoclinic transformation is suppressed. (C) 2002 Elsevier Science B.V. All rights reserved.
引用
收藏
页码:1 / 10
页数:10
相关论文
共 13 条
[1]   A PHILOSOPHY FOR THERMAL BARRIER COATING DESIGN AND ITS CORROBORATION BY 10000-H SERVICE EXPERIENCE ON RB211 NOZZLE GUIDE VANES [J].
BENNETT, A ;
TORIZ, FC ;
THAKKER, AB .
SURFACE & COATINGS TECHNOLOGY, 1987, 32 (1-4) :359-375
[2]   PHASE-STABILITY OF ZIRCONIA-BASED THERMAL BARRIER COATINGS .1. ZIRCONIA YTTRIA ALLOYS [J].
BRANDON, JR ;
TAYLOR, R .
SURFACE & COATINGS TECHNOLOGY, 1991, 46 (01) :75-90
[3]  
GREEN DJ, 1989, TRANSFORMATION TOUGH, P20
[4]   SURVIVABILITY OF THERMAL BARRIER COATINGS [J].
HERMAN, H ;
SHANKAR, NR .
MATERIALS SCIENCE AND ENGINEERING, 1987, 88 :69-74
[5]  
HEUER AH, 1988, SCI TECHNOLOGY ZIRCO, V3, P3
[6]   RAMAN-SPECTROSCOPY OF TETRAGONAL ZIRCONIA SOLID-SOLUTIONS [J].
KIM, DJ ;
JUNG, HJ ;
YANG, IS .
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1993, 76 (08) :2106-2108
[7]   Phase transformation and bond coat oxidation behavior of plasma-sprayed zirconia thermal barrier coating [J].
Lee, CH ;
Kim, HK ;
Choi, HS ;
Ahn, HS .
SURFACE & COATINGS TECHNOLOGY, 2000, 124 (01) :1-12
[8]  
LEE SH, 1997, J KOREAN I MET MAT, V35, P1744
[9]  
MILLER RA, 1986, SURF COAT TECH, V30, P1
[10]  
SAKUMA T, 1988, SCI TECHNOL, V3, P531