Improvement of maximum working voltage of resistive fault current limiter using YBCO thin film and metal thin film
被引:22
作者:
Kudo, Y
论文数: 0引用数: 0
h-index: 0
机构:Toshiba Co Ltd, Corp R&D Ctr, Saiwai Ku, Kawasaki, Kanagawa 2128582, Japan
Kudo, Y
Kubota, H
论文数: 0引用数: 0
h-index: 0
机构:Toshiba Co Ltd, Corp R&D Ctr, Saiwai Ku, Kawasaki, Kanagawa 2128582, Japan
Kubota, H
Yoshino, H
论文数: 0引用数: 0
h-index: 0
机构:Toshiba Co Ltd, Corp R&D Ctr, Saiwai Ku, Kawasaki, Kanagawa 2128582, Japan
Yoshino, H
Wachi, Y
论文数: 0引用数: 0
h-index: 0
机构:Toshiba Co Ltd, Corp R&D Ctr, Saiwai Ku, Kawasaki, Kanagawa 2128582, Japan
Wachi, Y
机构:
[1] Toshiba Co Ltd, Corp R&D Ctr, Saiwai Ku, Kawasaki, Kanagawa 2128582, Japan
[2] Super GM, Osaka 5300047, Japan
来源:
PHYSICA C-SUPERCONDUCTIVITY AND ITS APPLICATIONS
|
2002年
/
372卷
关键词:
fault current limiter;
YBCO;
sapphire;
series connection;
D O I:
10.1016/S0921-4534(02)01097-3
中图分类号:
O59 [应用物理学];
学科分类号:
摘要:
We have investigated the resistance of current limiting elements in order to improve the working voltage. The element consisted of YBCO thin film on sapphire substrate and metal film on AIN substrate. The working voltage was improved by optimizing the resistance of metal film, and the high value of 83 V/cm was obtained. Furthermore, a module composed of 12-connected elements in series was assembled. The current limiting properties of this module were measured using a capacity discharge circuit. The short circuit current of 1.74 kA was reduced to 460 A, the voltage drop of was 5.45 kV peak, and the dissipated energy was 15 kJ. (C) 2002 Elsevier Science B.V. All rights reserved.