The role of flank face interference in improving the accuracy of dynamic force predictions in peripheral milling

被引：10

作者：

Ranganath, S ^{[1
]}

Narayanan, K ^{[1
]}

Sutherland, JW ^{[1
]}

机构：

[1] Michigan Technol Univ, Dept Mech Engn Engn Mech, Houghton, MI 49931 USA

来源：

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME | 1999年 / 121卷 / 04期

关键词：

D O I：

10.1115/1.2833071

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

An enhanced model for the dynamic behavior of the peripheral milling process is described The model predicts the cutting forces and cutter deflections by including the effects of the flank face interference mechanism in addition to the chip removal effects. The interference mechanism is accounted for by considering the flank interference forces to be proportional to the interference volume. The volume of interference is estimated numerically. The total force acting on the tool is a combination of the forces dire to the cutting action and forces due to the interference. Experiments performed on 6061-T6 Aluminum validate the simulation results.

引用

页码：593 / 599

页数：7

共 19 条

[1] IN-PROCESS DETECTION AND SUPPRESSION OF CHATTER IN MILLING [J].

ALTINTAS, Y ;

CHAN, PK .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 1992, 32 (03) :329-347

[2]

DEVOR RE, 1980, 8 NAMRC P, P297

[3] Modelling machining dynamics including damping in the tool-workpiece interface [J].

Elbestawi, M.A. ;

Ismail, F. ;

Du, R. ;

Ullagaddi, B.C. .

Journal of engineering for industry, 1994, 116 (04) :435-439

[4]

Endres WJ, 1995, J ENG IND-T ASME, V117, P526, DOI 10.1115/1.2803530

[5]

Endres WJ, 1995, J ENG IND-T ASME, V117, P534, DOI 10.1115/1.2803531

[6] THE EFFECT OF RUNOUT ON CUTTING GEOMETRY AND FORCES IN END MILLING [J].

KLINE, WA ;

DEVOR, RE .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 1983, 23 (2-3) :123-140

[7]

KLINE WA, 1982, T ASME, V104, P272

[8]

Martellotti M.E., 1941, American Society of Mechanical Engineers -- Transactions, V63, P677

[9]

Martellotti M.E., 1945, T AM SOC MECH ENG, V67, P233, DOI 10.1115/1.4018229

[10]

MERRITT HE, 1965, ASME, V87, P447

← 1 2 →