Mechanical properties and fracture morphologies of poly(phenylene sulfide)/nylon66 blends - effect of nylon66 content and testing temperature

Poly(phenylene sulfide) (PPS) was melt blended with Nylon66 and the mechanical properties and corresponding fracture morphologies were investigated. The thermal distortion temperature (HDT) of PPS/Nylon 66 blend showed that the inherent thermal stability of pure PPS can be maintained up to 30 wt% Nylon66, but then it started to decrease linearly thereafter to that of pure Nylon66 based on the rule of mixtures relationship. Tensile tests of PPS/Nylon66 blends at testing temperatures of -30, 25, 75, and 150 degrees C showed that the maximum stress decreased up to 30 wt% Nylon66, and started to increase thereafter. Strain at break showed little change at low nylon content regardless of testing temperature, however, a large strain at break increase could be observed at more than 30 wt% Nylon66 and at 150 degrees C testing temperature. At the same testing temperatures, the impact strength of PPS/Nylon66 blends was investigated, and it was found that an impact strength increase at all testing temperatures could be observed at more than 30 wt% Nylon66. (C) 2000 Kluwer Academic Publishers.