Short-fiber-reinforced epoxy foams

被引：99

作者：

Alonso, M. V. ^{[1
]}

Auad, M. L. ^{[1
]}

Nutt, S. ^{[1
]}

机构：

[1] Univ So Calif, Dept Mat Sci, Gill Fdn, Composites Ctr, Los Angeles, CA 90089 USA

来源：

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING | 2006年 / 37卷 / 11期

关键词：

foams; glass fibers; aramid fiber; mechanical properties;

D O I：

10.1016/j.compositesa.2005.12.011

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Fiber-reinforced epoxy foams were synthesized with chopped glass and aramid fibers. The influence of fiber loading and length was investigated in order to optimize the properties of these materials. The mechanical performance of the foams was measured under compression and shear loading and compared with competing phenolic and polyurethane foams for calibration, as well as with unreinforced epoxy foam. In general, the mechanical behavior of the reinforced samples showed improvements with respect to the unreinforced foam. The microstructure of the reinforced samples was examined and revealed a homogeneous distribution of cells. The cell distribution was only modified when aramid fibers were used in the manufacture of composites. The thermal stability of the samples was analyzed by thermogravimetric analysis (TGA). Samples reinforced with glass fibers exhibited thermal stability superior to those reinforced with aramid fibers. (c) 2005 Elsevier Ltd. All rights reserved.

引用

页码：1952 / 1960

页数：9

共 28 条

[1] PARTIALLY MISCIBLE BLENDS OF EPOXY-RESIN AND EPOXIDIZED RUBBER - STRUCTURAL CHARACTERIZATION OF THE EPOXIDIZED RUBBER AND MECHANICAL-PROPERTIES OF THE BLENDS [J].

BUSSI, P ;

ISHIDA, H .

JOURNAL OF APPLIED POLYMER SCIENCE, 1994, 53 (04) :441-454

[2]

COLE LF, 2000, CONCR REPAIR B, P8

[3] MECHANISM OF REINFORCEMENT OF POLYURETHANE FOAM BY HIGH-MODULUS CHOPPED FIBERS [J].

COTGREAVE, TC ;

SHORTALL, JB .

JOURNAL OF MATERIALS SCIENCE, 1977, 12 (04) :708-717

[4]

FALBE J, 1970, CHEM ZTG, V94, P607

[5]

Gibson L. J., 1997, CELLULAR SOLIDS STRU

[6] Correlation of processing methodology to the physical and mechanical properties of syntactic foams with and without fibers [J].

Gupta, N ;

Karthikeyan, CS ;

Sankaran, S ;

Kishore .

MATERIALS CHARACTERIZATION, 1999, 43 (04) :271-277

[7] Elastic behaviour of plain and fibre-reinforced syntactic foams under compression [J].

Karthikeyan, CS ;

Sankaran, S ;

Kishore .

MATERIALS LETTERS, 2004, 58 (06) :995-999

[8] Processing and compressive strengths of syntactic foams with and without fibrous reinforcements [J].

Karthikeyan, CS ;

Sankaran, S ;

Kumar, MNJ ;

Kishore .

JOURNAL OF APPLIED POLYMER SCIENCE, 2001, 81 (02) :405-411

[9] ANALYSIS OF DEFORMATION-BEHAVIOR AND FRACTURE FEATURES IN GLASS EPOXY COMPOSITES TOUGHENED BY RUBBER AND CARBON ADDITIONS [J].

KAUSHAL, S ;

KISHORE .

JOURNAL OF MATERIALS SCIENCE LETTERS, 1992, 11 (02) :86-88

[10] The effect of particle-matrix adhesion on the mechanical behavior of glass filled epoxies: Part 1. A study on yield behavior and cohesive strength [J].

Kawaguchi, T ;

Pearson, RA .

POLYMER, 2003, 44 (15) :4229-4238

← 1 2 3 →