Mechanical design of HD2, a 15 T Nb3Sn dipole magnet with a 35 mm bore

被引：23

作者：

Ferracin, P. ^{[1
]}

Bartlett, S. E. ^{[1
]}

Caspi, S. ^{[1
]}

Dietderich, D. R. ^{[1
]}

Gourlay, S. A. ^{[1
]}

Hafalia, A. R. ^{[1
]}

Hannaford, C. R. ^{[1
]}

Lietzke, A. F. ^{[1
]}

Mattafirri, S. ^{[1
]}

McInturff, A. D. ^{[1
]}

Sabbi, G. L. ^{[1
]}

机构：

[1] Univ Calif Berkeley, Lawrence Berkeley Lab, Berkeley, CA 94720 USA

来源：

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY | 2006年 / 16卷 / 02期

关键词：

dipole magnet; Nb3Sn;

D O I：

10.1109/TASC.2006.871323

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 [电气工程]; 0809 [电子科学与技术];

摘要：

After the fabrication and test of HD1, a 16 T Nb3Sn dipole magnet based on flat racetrack coil configuration, the Superconducting Magnet Program at Lawrence Berkeley National Laboratory (LBNL) is developing the Nb3Sn dipole HD2. With a dipole field above 15 T, a 35 nun clear bore, and nominal field harmonies within a fraction of one unit, HD2 represents a further step towards the application of block-type coils to high-field accelerator magnets. The design features tilted racetrack-type ends, to avoid obstructing the beam path, and a 4 mm thick stainless steel tube, to support the coil during the pre-loading operation. The mechanical structure, similar to the one used for HD1, is based on an external aluminum shell pre-tensioned with pressurized bladders. Axial rods and stainless steel plates provide longitudinal support to the coil ends during magnet excitation. A 3D finite element analysis has been performed to evaluate stresses and deformations from assembly to excitation, with particular emphasis on conductor displacements due to Lorentz forces. Numerical results are presented and discussed.

引用

页码：378 / 381

页数：4

共 8 条

[1]

Benjegerdes R., 2001, PACS2001. Proceedings of the 2001 Particle Accelerator Conference (Cat. No.01CH37268), P208, DOI 10.1109/PAC.2001.987471

[2]

Caspersson T, 1972, Int Rev Exp Pathol, V11, P1

[3]

16 Tesla Nb3Sn dipole development at Texas A&M University [J].

Elliott, T ;

Jaisle, A ;

Latypov, D ;

McIntyre, P ;

McJunkins, P ;

Shen, WJ ;

Soika, R ;

Gaedke, RM .

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 1997, 7 (02) :555-557

[4]

Mechanical analysis of the Nb3Sn dipole magnet HD1 [J].

Ferracin, P ;

Bartlett, SE ;

Caspi, S ;

Dietderich, DR ;

Gourlay, SA ;

Hannaford, CR ;

Hafalia, AR ;

Lietzke, AF ;

Mattafirri, S ;

Sabbi, G .

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2005, 15 (02) :1119-1122

[5]

Test results of HD1b, an upgraded 16 tesla Nb3Sn dipole magnet [J].

Lietzke, AF ;

Bartlett, SE ;

Bish, P ;

Caspi, S ;

Dietderich, D ;

Ferracin, P ;

Gourlay, SA ;

Hafalia, AR ;

Hannaford, CR ;

Higley, H ;

Lau, W ;

Liggins, N ;

Mattafirri, S ;

Nyman, M ;

Sabbi, G ;

Scanlan, R ;

Swanson, J .

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2005, 15 (02) :1123-1127

[6]

MCINTURFF AD, 1997, P 1997 PART ACC C VA, P3212

[7]

Design of HD2:: A 15 tesla Nb3Sn dipole with a 35 mm bore [J].

Sabbi, G ;

Bartlett, SE ;

Caspi, S ;

Dietdcrich, DR ;

Ferracin, P ;

Gourlay, SA ;

Hafalia, AR ;

Hannaford, CR ;

Lietzke, AF ;

Mattafirri, S ;

McInturff, AD ;

Scanlan, R .

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2005, 15 (02) :1128-1131

[8]

A NB3SN DIPOLE MAGNET REACTED AFTER WINDING [J].

TAYLOR, C ;

SCANLAN, R ;

PETERS, C ;

WOLGAST, R ;

GILBERT, W ;

HASSENZAHL, W ;

MEUSER, R ;

RECHEN, J .

IEEE TRANSACTIONS ON MAGNETICS, 1985, 21 (02) :967-970

← 1 →