The use of cutting force and acoustic emission signals for the monitoring of tool insert geometry during rough face milling

被引：34

作者：

Wilcox, SJ ^{[1
]}

Reuben, RL ^{[1
]}

Souquet, P ^{[1
]}

机构：

[1] UNIV GLAMORGAN,DEPT MECH & MFG ENGN,PONTYPRIDD CF37 1DL,M GLAM,WALES

来源：

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE | 1997年 / 37卷 / 04期

关键词：

D O I：

10.1016/S0890-6955(96)00069-7

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The use of acoustic emission (AE) and cutting force has been applied to the detection of changes in milling tool insert geometries. These geometries, produced by precision grinding, were intended to simulate different forms of naturally occurring wear such as crater, notch and flank wear, local changes in rake angle and edge breakdown. The results indicate that both cutting force and AE can be used as indicators of changes in cutting tool geometry with consequent implications for diagnostic, geometry-specific, wear detection. (C) 1997 Elsevier Science Ltd.

引用

页码：481 / 494

页数：14

共 18 条

[1] AN EXPERT-SYSTEM FOR RELIABLE TOOL-REPLACEMENT POLICIES IN METAL-CUTTING [J].

ALTO, A ;

DASSISTI, M ;

GALANTUCCI, LM .

JOURNAL OF ENGINEERING FOR INDUSTRY-TRANSACTIONS OF THE ASME, 1994, 116 (03) :405-407

[2]

BLUM T, 1988, B JPN SOC PREC ENG, V22, P301

[3]

BLUM T, 1990, J ENG IND-T ASME, V112, P203, DOI 10.1115/1.2899576

[4]

Buchar J., 1986, Mechanical behaviour of metals at extremely high strain rates

[5]

CAROLAN TA, 1996, ASME P, V118, P428

[6] On-line tool breakage detection in turning: a multi-sensor method [J].

Colgan, J. ;

Chin, H. ;

Danai, K. ;

Hayashi, S.R. .

Journal of engineering for industry, 1994, 116 (01) :117-122

[7] ACOUSTIC-EMISSION FROM THE FACE MILLING PROCESS - THE EFFECTS OF PROCESS VARIABLES [J].

DIEI, EN ;

DORNFELD, DA .

JOURNAL OF ENGINEERING FOR INDUSTRY-TRANSACTIONS OF THE ASME, 1987, 109 (02) :92-99

[8] ACOUSTIC-EMISSION SENSING OF TOOL WEAR IN FACE MILLING [J].

DIEI, EN ;

DORNFELD, DA .

JOURNAL OF ENGINEERING FOR INDUSTRY-TRANSACTIONS OF THE ASME, 1987, 109 (03) :234-240

[9]

IWATA K, 1977, ANN CIRP, V25, P21

[10] MINIMUM WORK AS A POSSIBLE CRITERION FOR DETERMINING FRICTIONAL CONDITIONS AT TOOL-CHIP INTERFACE IN MACHINING [J].

OXLEY, PLB ;

HASTINGS, WF .

PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, 1976, 282 (1310) :565-+

← 1 2 →