Review of structural and functional characteristics of greenhouses in European Union countries: Part I, Design requirements

被引:105
作者
von Elsner, B
Briassoulis, D
Waaijenberg, D
Mistriotis, A
von Zabeltitz, C
Gratraud, J
Russo, G
Suay-Cortes, R
机构
[1] Univ Hannover, Inst Hort & Agr Engn, D-30419 Hannover, Germany
[2] Agr Univ Athens, Dept Agr Engn, Athens 11855, Greece
[3] DLO, IMAG, NL-6700 AA Wageningen, Netherlands
[4] CEMAGREF, F-34033 Montpellier, France
[5] Univ Bari, Inst Agr Bldg, I-70126 Bari, Italy
[6] ENSAM Univ, Bioequipement Engn Dept, F-34060 Montpellier, France
来源
JOURNAL OF AGRICULTURAL ENGINEERING RESEARCH | 2000年 / 75卷 / 01期
关键词
D O I
10.1006/jaer.1999.0502
中图分类号
S2 [农业工程];
学科分类号
0828 ;
摘要
The present work is an overview of the factors influencing the greenhouse design such as the climate, the local building regulations the indoor climate requirements and the necessary functional characteristics. The variations with respect to these factors observed throughout most of the European Union countries are described in detail and their influence to the greenhouse design is critically investigated. Such an analysis of the main factors influencing the greenhouse design is considered necessary before the most common greenhouse types used in Europe are presented (Part II). This systematic review is expected to support the effort for developing a common design methodology for greenhouses at European level. (C) 2000 Silsoe Research Institute.
引用
收藏
页码:1 / 16
页数:16
相关论文
共 64 条
[1]  
*AENOR, 1992, 7620892 UNE AENOR
[2]  
*AFN, 1991, 57063 NFU AFN
[3]  
*AFN, 1991, 57060 NFU AFN
[4]  
*AGR BANK GREEC, 1986, TECHN GREENH SPEC
[5]  
[Anonymous], 1983, THESIS AGR U WAGENIN
[6]  
[Anonymous], 1976, 1054 DIN
[7]  
*ASAE, 1992, 2884 ASAE EP
[8]  
Baudoin W. O., 1990, 90 FAO
[9]   Mechanical properties of covering materials for greenhouses .2. General overview [J].
Briassoulis, D ;
Waaijenberg, D ;
Gratraud, J ;
vonEslner, B .
JOURNAL OF AGRICULTURAL ENGINEERING RESEARCH, 1997, 67 (02) :81-96
[10]  
Castilla N., 1995, Plasticulture, P13