Characterisation and modelling of brittle fracture in two-dimensional soil cutting

被引:34
作者
Aluko, OB [1 ]
Chandler, HW
机构
[1] Obafemi Awolowo Univ, Dept Agr Engn, Ife, Nigeria
[2] Univ Aberdeen, Dept Engn, Aberdeen AB24 3UE, Scotland
关键词
D O I
10.1016/j.biosystemseng.2004.03.009
中图分类号
S2 [农业工程];
学科分类号
0828 [农业工程];
摘要
Brittle fracture by the propagation of tensile cracks accounts for soil failure during many soil Cutting and tilth forming operations. However, this mechanism is little understood and cannot be analysed using the classical Mohr-Coulomb failure theory in which soil is characterised by its cohesive strength c and angle of internal shearing resistance phi. Based on previous experimental observations of its deformation characteristics, a theoretical analysis was developed for the mechanism of brittle fracture using linear elastic fracture mechanics methods. The soil was characterised by a fracture strength property namely the critical stress intensity factor K-Ic. Using five model plane blades of rake angles 25, 40, 55, 70 and 90degrees, respectively, soil cutting experiments were carried out in the laboratory on sandy loam and clay loam soils prepared to different soil strength and soil-blade interface conditions. During these experiments, clod sizes and cutting force components were measured. The results showed that in brittle fracture, the cutting force is cyclic in nature and is essentially concentrated:in the region of the blade tip. For experiments where brittle fracture occurred, clod size estimates based on critical crack lengths predicted using the present brittle fracture theory were in closer agreement with measured experimental rupture distances than rupture distances predicted using existing shear failure theory. The theoretical analysis, which comprises inter alia two regimes of crack behaviour termed the short and long crack models, covers the complete process of crack initiation and subsequent clod formation. The analysis further shows that there is a transition from short to long crack behaviour and the cutting force attains a maximum during this transition. However, the inability to deduce short crack behaviour under mixed mode loading limits further extraction of this maximum cutting force using the present theoretical analysis. (C) 2004 Silsoe Research Institute. All rights reserved Published by Elsevier Ltd.
引用
收藏
页码:369 / 381
页数:13
相关论文
共 36 条
[1]
An experimental investigation of the characteristics of and conditions for brittle fracture in two-dimensional soil cutting [J].
Aluko, OB ;
Seig, DA .
SOIL & TILLAGE RESEARCH, 2000, 57 (03) :143-157
[2]
ALUKO OB, 1988, THESIS U NEWCASTLE T
[3]
FRACTURING OF SOIL CLODS AND THE SOIL CRUMBLING EFFECTIVENESS OF DRAFT TILLAGE IMPLEMENTS [J].
BERNTSEN, R ;
BERRE, B .
SOIL & TILLAGE RESEARCH, 1993, 28 (01) :79-94
[4]
TEWKSBURY LECTURE - PUTTING FRACTURE TO WORK [J].
BILBY, BA .
JOURNAL OF MATERIALS SCIENCE, 1980, 15 (03) :535-556
[5]
BRITTLE-FRACTURE OF SOIL AGGREGATES AND THE COMPACTION OF AGGREGATE BEDS [J].
BRAUNACK, MV ;
HEWITT, JS ;
DEXTER, AR .
JOURNAL OF SOIL SCIENCE, 1979, 30 (04) :653-+
[6]
SOIL ELASTIC-CONSTANTS .2. APPLICATION TO ANALYSIS OF SOIL CRACKING [J].
BRIONES, AA ;
UEHARA, G .
SOIL SCIENCE SOCIETY OF AMERICA JOURNAL, 1977, 41 (01) :26-29
[7]
THE USE OF NON-LINEAR FRACTURE-MECHANICS TO STUDY THE FRACTURE PROPERTIES OF SOILS [J].
CHANDLER, HW .
JOURNAL OF AGRICULTURAL ENGINEERING RESEARCH, 1984, 29 (04) :321-327
[8]
CHANDLER HW, 1985, SPAN, V28, P106
[9]
THE ESSENTIAL MECHANICS OF CONCHOIDAL FLAKING [J].
COTTERELL, B ;
KAMMINGA, J ;
DICKSON, FP .
INTERNATIONAL JOURNAL OF FRACTURE, 1985, 29 (04) :205-221
[10]
Dexter A. R., 1975, Journal of Terramechanics, V12, P3, DOI 10.1016/0022-4898(75)90003-8