Laser cladding of turbine blades

被引：169

作者：

Shepeleva, L ^{[1
]}

Medres, B

Kaplan, WD

Bamberger, M

Weisheit, A

机构：

[1] Technion Israel Inst Technol, Dept Mat Engn, IL-32000 Haifa, Israel

[2] Inst Werkstoffkunde & Werkstoffteckn, D-38678 Clausthal Zellerfeld, Germany

来源：

SURFACE & COATINGS TECHNOLOGY | 2000年 / 125卷 / 1-3期

关键词：

laser cladding; plasma cladding; shroud shelve; turbine blade;

D O I：

10.1016/S0257-8972(99)00603-9

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

A comparative study of two different techniques for the application of wear-resistant coatings for contact surfaces of shroud shelves of gas turbine engine blades (GTE) has been conducted. Wear-resistant coatings were applied on In713 by laser cladding with direct injection of the cladding powder into the melt pool. Laser cladding was conducted with a TRUMPF-2500, CW-CO, laser. The laser cladding was compared with commercially available plasma cladding with wire. Both plasma and laser cladded zones were characterized by optical and scanning electron microscopy. It was found that the laser cladded zone has a higher microhardness value (650-820 HV) compared with that of the plasma treated material (420-440 HV). This is a result of the significant reduction in grain size in the case of laser cladding. Unlike the plasma cladded zones, the laser treated material is free of micropores and microcracks. (C) 2000 Elsevier Science S.A. All rights reserved.

引用

页码：45 / 48

页数：4

共 6 条

[1] Calculation of process parameters for laser alloying and cladding [J].

Bamberger, M ;

Kaplan, WD ;

Medres, B ;

Shepeleva, L .

JOURNAL OF LASER APPLICATIONS, 1998, 10 (01) :29-33

[2]

BOAZ M, 1990, SURF COAT TECH, V42, P175

[3]

COSOV AI, 1984, AVIAZIONAYA PROMISHL, V2, P8

[4]

KYSHKIN ST, 1987, AVIAZIONNIE MAT, P387

[5]

SOLOVIOV AA, 1984, 1 ALL UN C LAS MET L, P98

[6]

Steen W.M., 1991, LASER MAT PROCESSING, P266

← 1 →