Impact properties of natural fiber-reinforced epoxy foams

被引:32
作者
Bledzki, AK [1 ]
Gassan, J [1 ]
Zhang, WY [1 ]
机构
[1] Univ Gesamthsch Kassel, Inst Werkstofftech Kunststoff & Recyclingtech, D-34109 Kassel, Germany
关键词
D O I
10.1177/0021955X9903500605
中图分类号
O69 [应用化学];
学科分类号
081704 ;
摘要
This paper deals with the impact behavior of natural fiber-reinforced epoxy foams. The effects of different, types of fibers, fiber content and void content were discussed. It; was found that the woven flax fiber results in composites with better impact strengths than the woven jute fiber based composites. The impact damage configuration and mechanism of these laminated composites were discussed. Impact properties such as loss energy and damping index were found to be almost linearly dependent on void content and impact energy. The loss energy and damping index were decreased with increasing fiber content under comparable void content and test conditions.
引用
收藏
页码:550 / +
页数:14
相关论文
共 33 条
[1]   The role of reinforcement architecture on impact damage mechanisms and post-impact compression behaviour [J].
Bibo, GA ;
Hogg, PJ .
JOURNAL OF MATERIALS SCIENCE, 1996, 31 (05) :1115-1137
[2]  
BIBO GA, 1995, 3 INT C DEF FRACT CO, P374
[3]  
BIBO GA, 1995, DEF FRACT COMP 3 INT, P374
[4]   The influence of micropores on the dynamic-mechanical properties on reinforced epoxy foams [J].
Bledzki, AK ;
Kurek, K ;
Gassan, J .
JOURNAL OF MATERIALS SCIENCE, 1998, 33 (12) :3207-3211
[5]  
BLEDZKI AK, 1995, MATERIALPRUFUNG, V37, P360
[6]   THE EFFECTS OF FABRIC WEAVE AND SURFACE TEXTURE ON THE INTERLAMINAR FRACTURE-TOUGHNESS OF ARAMID EPOXY LAMINATES [J].
BRISCOE, BJ ;
COURT, RS ;
WILLIAMS, DR .
COMPOSITES SCIENCE AND TECHNOLOGY, 1993, 47 (03) :261-270
[7]  
CHOU S, 1994, COMPOS SCI TECHNOL, V51, P23
[8]   MODELING OF IMPACT DAMAGE IN COMPOSITE LAMINATES [J].
CLARK, G .
COMPOSITES, 1989, 20 (03) :209-214
[9]  
DAVIES P, 1994, EUR C COMP TEST STAN, P513
[10]  
FOLSTER T, 1993, KUNSTST-GER PLAST+, V83, P687