MAST Upgrade - Construction Status

被引:24
作者
Milnes, Joe [1 ]
Ben Ayed, Nizar [1 ]
Dhalla, Fahim [1 ]
Fishpool, Geoff [1 ]
Hill, John [1 ]
Katramados, Ioannis [1 ]
Martin, Richard [1 ]
Naylor, Graham [1 ]
O'Gorman, Tom [1 ]
Scannell, Rory [1 ]
机构
[1] Culham Ctr Fus Energy, Culham, Oxon, England
关键词
MAST; Upgrade; Design; Construction; Lessons learned; Systems engineering;
D O I
10.1016/j.fusengdes.2015.03.002
中图分类号
TL [原子能技术]; O571 [原子核物理学];
学科分类号
0827 ; 082701 ;
摘要
The Mega Amp Spherical Tokamak (MAST) is the centre piece of the UK fusion research programme. In 2010, a MAST Upgrade programme was initiated with three primary objectives, to contribute to: (1) testing reactor concepts (in particular exhaust solutions via a flexible divertor allowing Sup er-X and other extended leg configurations); (2) adding to the knowledge base for ITER (by addressing important plasma physics questions and developing predictive models to help optimise ITER performance of ITER) and (3) exploring the feasibility of using a spherical tokamak as the basis for a fusion Component Test Facility. With the project mid-way through its construction phase, progress will be reported on a number of the critical subsystems. This will include manufacture and assembly of the coils, armour and support structures that make up the new divertors, construction of the new set coils that make up the centre column, installation of the new power supplies for powering the divertor coils and enhanced TF coil set, progress in delivering the upgraded diagnostic capability, the modification and upgrading of the NBI heating systems and the complete overhaul of the machine control infrastructure, including a new control room with full remote participation facilities. (C) 2015 EURATOM/CCFE Fusion Association. Published by Elsevier B.V. All rights reserved.
引用
收藏
页码:42 / 47
页数:6
相关论文
共 9 条
[1]   A CAD-Based Tool for Calculating Power Deposition on Tokamak Plasma-Facing Components [J].
Arter, Wayne ;
Riccardo, Valeria ;
Fishpool, Geoff .
IEEE TRANSACTIONS ON PLASMA SCIENCE, 2014, 42 (07) :1932-1942
[2]   Engineering design of the double neutral beam injection system for MAST Upgrade [J].
Barrett, Thomas R. ;
Jones, Chris ;
Blatchford, Peter ;
Smith, Brendan ;
McAdams, Roy ;
Woods, Nick .
FUSION ENGINEERING AND DESIGN, 2011, 86 (6-8) :789-792
[3]  
Foster J., 2014, S FUS TECHN SAN SEB
[4]  
Lisgo S., 2009, 36 EUR PHYS SOC EPS
[5]  
Milnes J., 2013, P 25 IEE NPSS S FUS
[6]   MAST: Results and Upgrade Activities [J].
Morris, A. W. .
IEEE TRANSACTIONS ON PLASMA SCIENCE, 2012, 40 (03) :682-691
[7]   Geometrical properties of a "snowflake" divertor [J].
Ryutov, D. D. .
PHYSICS OF PLASMAS, 2007, 14 (06)
[8]  
Serrano J., 2009, P ICALEPCS TUC004 KO
[9]   Super-X divertors and high power density fusion devices [J].
Valanju, P. M. ;
Kotschenreuther, M. ;
Mahajan, S. M. ;
Canik, J. .
PHYSICS OF PLASMAS, 2009, 16 (05)