Analysis of a new specimen for mixed mode fracture tests on brittle materials

被引：166

作者：

Ayatollahi, M. R. ^{[1
]}

Aliha, M. R. M. ^{[1
]}

机构：

[1] Iran Univ Sci & Technol, Dept Mech Engn, Fatigue & Fracture Lab, Tehran 16846, Iran

来源：

ENGINEERING FRACTURE MECHANICS | 2009年 / 76卷 / 11期

关键词：

Mixed mode loading; Test specimen; Brittle fracture; Finite element analysis; DISC-TYPE SPECIMENS; T-STRESS; II FRACTURE; TOUGHNESS; CERAMICS; MARBLE; ROCK; PMMA;

D O I：

10.1016/j.engfracmech.2009.02.016

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

Numerical and experimental studies were performed on a new fracture test configuration called the diagonally loaded square plate (DLSP) specimen. The mode I and mode II stress intensity factors were computed for different crack lengths and crack orientation angles using finite element analysis. The numerical results show that the DLSP specimen is able to provide pure mode I, pure mode II and any mixed mode loading conditions in between. Fracture experiments were also conducted on Plexiglas using the DLSP specimen. It is shown that the results obtained from the fracture tests are consistent very well with mixed mode fracture theories. (C) 2009 Elsevier Ltd. All rights reserved.

引用

页码：1563 / 1573

页数：11

共 29 条

[1] Mode I and mode II fracture toughness testing for a coarse grain marble [J].

Aliha, M. R. M. ;

Ashtari, R. ;

Ayatollahi, M. R. .

MODERN PRACTICE IN STRESS AND VIBRATION ANALYSIS VI, PROCEEDINGS, 2006, 5-6 :181-+

[2] METHOD TO PRODUCE UNIFORM PLANE-STRESS STATES WITH APPLICATIONS TO FIBER-REINFORCED MATERIALS [J].

ARCAN, M ;

HASHIN, Z ;

VOLOSHIN, A .

EXPERIMENTAL MECHANICS, 1978, 18 (04) :141-146

[3] COMBINED MODE FRACTURE TOUGHNESS MEASUREMENT BY DISK TEST [J].

AWAJI, H ;

SATO, S .

JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 1978, 100 (02) :175-182

[4] Wide range data for crack tip parameters in two disc-type specimens under mixed mode loading [J].

Ayatollahi, M. R. ;

Aliha, M. R. M. .

COMPUTATIONAL MATERIALS SCIENCE, 2007, 38 (04) :660-670

[5] On determination of mode II fracture toughness using semi-circular bend specimen [J].

Ayatollahi, M. R. ;

Aliha, M. R. M. .

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2006, 43 (17) :5217-5227

[6] Mixed mode brittle fracture in PMMA - An experimental study using SCB specimens [J].

Ayatollahi, MR ;

Aliha, MRM ;

Hassani, MM .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 417 (1-2) :348-356

[7] Cracked Brazilian disc specimen subjected to mode II deformation [J].

Ayatollahi, MR ;

Aliha, MRM .

ENGINEERING FRACTURE MECHANICS, 2005, 72 (04) :493-503

[8]

Ayatollahi MR, 2001, Build Res J, V49, P167

[9] Effect of mixed mode I and II loading on the fracture surface of polymethyl methacrylate (PMMA) [J].

Bhattacharjee, D ;

Knott, JF .

INTERNATIONAL JOURNAL OF FRACTURE, 1995, 72 (04) :359-381

[10] Measurement of rock fracture toughness under modes I and II and mixed-mode conditions by using disc-type specimens [J].

Chang, SH ;

Lee, CI ;

Jeon, S .

ENGINEERING GEOLOGY, 2002, 66 (1-2) :79-97

← 1 2 3 →