Compressive behavior of 64% porosity NiTi alloy: An experimental study

被引:20
作者
Guo, Zhiqiang [1 ]
Xie, Huimin [1 ]
Dai, Fulong [1 ]
Qiang, Haichang [2 ]
Rong, Lijian [2 ]
Chen, Pengwan
Huang, Fenglei
机构
[1] Tsinghua Univ, Dept Engn Mech, FML, Beijing 100084, Peoples R China
[2] Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China
来源
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2009年 / 515卷 / 1-2期
关键词
64% porosity NiTi alloy; Loading-unloading history; Full-field surface deformation; Metallographical analysis;
D O I
10.1016/j.msea.2009.03.083
中图分类号
TB3 [工程材料学];
学科分类号
082905 [生物质能源与材料];
摘要
An experimental investigation of the compressive behavior of 64% porosity NiTi alloy was undertaken in this study. Both quasi-static and low-frequency fatigue compressive tests were carried out to obtain the compressive stress-strain curves of specimens. Special attention was paid to the loading-unloading history effect on the stress-strain curves. Full-field surface deformation measurement was carried out via moire interferometry when specimens were compressed. Inhomogeneous deformation property of the material caused by the porous structure was clearly presented. The loading-unloading history effect was also studied using the moire interferometry method. Finally real time metallographic analysis during compression tests explained the causes of the loading-unloading history effect of the porous material from microscopic point of view. These findings are believed to be essential elements in the theoretical modeling of compressive behavior especially loading-unloading history effect of the high porosity NiTi alloy, and. which still need further systematic examination in the future. (C) 2009 Elsevier B.V. All rights reserved.
引用
收藏
页码:117 / 130
页数:14
相关论文
共 24 条
[1]
Dichlorodiphenyldichloroethylene concentrations in umbilical cord of newborns and determinant maternal factors [J].
Barraza-Vazquez, Antonio ;
Hugo Borja-Aburto, Victor ;
Bassol-Mayagoitia, Susana ;
Monrroy, Antonio ;
Recio-Vega, Rogelio .
JOURNAL OF APPLIED TOXICOLOGY, 2008, 28 (01) :27-34
[2]
BISWAS A, 2005, ACTA MAT, V1415, P1425
[3]
BRINSON LC, 2004, J MECH PHYS SOLIDS, V1549, P1571
[4]
CHU CL, 2004, MAT SCI ENG A-STRUCT, V114, P119
[5]
FENG P, 2006, J MECH PHYS SOLIDS, V1568, P1603
[6]
GRAHAM J, 2003, J BONE JOINT SURG, V1901, P1908
[7]
GREINER C, 2005, ACTA BIOMATER, V705, P716
[8]
GUO Z, 2006, EXP MECH, V699, P711
[9]
HU GX, 2008, J MATER PROCESS TECH, V395, P399
[10]
JIANG HC, 2006, THESIS GRADUATE SCH