Performance study of a re-circulating cabinet dryer using a household dehumidifier

被引:22
作者
Adapa, PK
Sokhansanj, S
Schoenau, GJ
机构
[1] Univ Saskatchewan, Coll Engn, Saskatoon, SK S7N 5A9, Canada
[2] Oak Ridge Natl Lab, Div Environm Sci, Oak Ridge, TN 37831 USA
基金
加拿大自然科学与工程研究理事会;
关键词
batch drying; continuous drying; heat pump; low temperature drying; SMER;
D O I
10.1081/DRT-120015407
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
The performance and operating characteristics of a low temperature re-circulating cabinet dryer using a dehumidifier loop were studied using alfalfa. Chopped alfalfa, initially at 70% moisture content, was dried to 10% moisture content in the dryer. Two dryer setups were used. The dryers in each case had a partitioned cabinet with trays of material on one side and a stack of one or two small household dehumidifiers on the other side, Air was re-circulated through the material from bottom to the top and back through the dehumidifiers. Two drying configurations were tested. In one, the material was left on the trays until drying was complete (batch or fixed tray drying). In the other configuration, the trays were moved from top to bottom, introducing a new tray at the top while removing an old tray from bottom. Drying air temperature ranged from 25 to 45degreesC. The average air velocity through the material was 0.38 m/s. Alfalfa chops dried in 5 h in the fixed tray drying and in 411 in the moving tray drying. The specific moisture extraction rate ranged from 0.35 to 1.02 kg/kWh for batch drying and stayed at an average value of 0.50 kg/kWh for continuous/moving tray drying.
引用
收藏
页码:1673 / 1689
页数:17
相关论文
共 12 条
[1]   Mathematical model development and simulation of heat pump fruit dryer [J].
Achariyaviriya, S ;
Soponronnarit, S ;
Terdyothin, A .
DRYING TECHNOLOGY, 2000, 18 (1-2) :479-491
[2]  
ADAPA PK, 2001, THESIS U SASKATCHEWA
[3]  
Alves O, 1996, DRY TECHNOL, V14, P2061
[4]  
BAINES PG, 1986, THESIS U OTAGO NZ
[5]   EXPERIMENTAL-VERIFICATION OF A HEAT-PUMP ASSISTED CONTINUOUS DRYER SIMULATION-MODEL [J].
CLEMENTS, S ;
JIA, XG ;
JOLLY, P .
INTERNATIONAL JOURNAL OF ENERGY RESEARCH, 1993, 17 (01) :19-28
[6]  
HODGETT DL, 1976, CHEM ENG, V311, P510
[7]  
JAY S, 1994, DRYING 94, VA, P683
[8]  
MCQUISTON FC, 1998, HEATING VENTILATING, P68
[9]   Heat pump drying of agricultural materials [J].
Prasertsan, S ;
Saen-Saby, P .
DRYING TECHNOLOGY, 1998, 16 (1-2) :235-250
[10]  
SOSLE VR, 2000, ASAE ANN INT M MIDW