Influence of combustion aids on suspension combustion synthesis of mullite powders

Mullite powders were obtained by suspension combustion synthesis. The reaction was performed in a combustion reactor designed in the laboratory, which presents some advantages over other classical procedures (heating with a hot-plate, a furnace or a microwave oven). Aluminium nitrate, as a source of At, and either TEOS or a colloidal silica suspension, as a source of Si, were used as reagents. Urea, at either 100 or 200% excess over the stoichiometric ratio, was used as fuel. NH4NO3, HNO3, NH4Cl and H2O2 were compared as combustion aids. Mullite phase with a high crystallinity and a high specific surface area was directly obtained by using aluminium nitrate, colloidal silica suspension, a 100% excess of urea and either NH4NO3 or H2O2. The selection of a combustion aid determines the characteristics of the as-synthesized powders. In addition to enthalpy predictions the reduction potential is a key parameter for the combustion to occur. (c) 2005 Elsevier Ltd. All rights reserved.