Microstructural basis for the effect of chromium on the strength and toughness of AF1410-based high performance steels

被引：83

作者：

Ayer, R ^{[1
]}

Machmeier, PM ^{[1
]}

机构：

[1] SNAP ON INC,MAT & PROC ENGN,KENOSHA,WI 53141

来源：

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE | 1996年 / 27卷 / 09期

关键词：

D O I：

10.1007/BF02652345

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The Variation in strength and Charpy impact toughness as a function of tempering temperature in the range of 200 degrees C to 650 degrees C was investigated in AF 1410 and AF 1410 + 1 pct Cr steels produced in a laboratory-scale, and a commercially produced AerMet 100 steel. The tensile test results showed that AF 1410 + 1 pct Cr had lower strength compared to AF 1410, while AerMet 100 had the highest strength of the three steels examined, Transmission electron microscopy (TEM) studies demonstrated that the strength variations among the steels can be attributed to differences in the matrix:carbide coherency strain and the volume fraction of the strengthening M(2)C carbides. The toughness values of the three steels were comparable when tempered up to 424 degrees C. Tempering at and above 454 degrees C resulted in a relative enhancement of toughness in AF 1410 + 1 pct Cr steel compared to AF 1410. This toughening was attributed to the destabilization of cementite at lath and prior austenite boundaries and the formation of reverted austenite.

引用

页码：2510 / 2517

页数：8

共 22 条

[1] DIFFRACTION CONTRAST FROM SPHERICALLY SYMMETRICAL COHERENCY STRAINS [J].

ASHBY, MF ;

BROWN, LM .

PHILOSOPHICAL MAGAZINE, 1963, 8 (91) :1083-&

[2] TRANSMISSION ELECTRON-MICROSCOPY EXAMINATION OF HARDENING AND TOUGHENING PHENOMENA IN AERMET-100 [J].

AYER, R ;

MACHMEIER, PM .

METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1993, 24 (09) :1943-1955

[3]

AYER R, 1992, 1 INT C MICR MECH PR, P251

[4]

CHANDHOK VK, 1962, T METALL SOC AIME, V224, P858

[5]

CHANDHOK VK, 1963, T ASM, V56, P677

[6]

Davenport A. T., 1975, Metal Science, V9, P201, DOI 10.1179/030634575790445044

[7] ORIENTATION RELATIONSHIP AND GROWTH DIRECTION OF MO2C IN FERRITE [J].

DYSON, DJ ;

KEOWN, SR ;

RAYNOR, D ;

WHITEMAN, JA .

ACTA METALLURGICA, 1966, 14 (07) :867-&

[8] THE INFLUENCE OF INCLUSION SPACING AND MICROSTRUCTURE ON THE FRACTURE-TOUGHNESS OF THE SECONDARY HARDENING STEEL AF1410 [J].

GARRISON, WM ;

MOODY, NR .

METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1987, 18 (07) :1257-1263

[9]

Haidemenopoulos G. N., 1990, INNOVATIONS ULTRAHIG, P549

[10]

IRANI JJ, 1965, J IRON STEEL I AUG, P826

← 1 2 3 →