Wear and corrosion properties of plasma sprayed Al2O3 and Cr2O3 coatings sealed by aluminum phosphates

被引：63

作者：

Leivo, EM ^{[1
]}

Vippola, MS ^{[1
]}

Sorsa, PPA ^{[1
]}

Vuoristo, PMJ ^{[1
]}

Mantyla, TA ^{[1
]}

机构：

[1] TAMPERE UNIV TECHNOL, INST SCI MAT, FIN-33101 TAMPERE, FINLAND

来源：

JOURNAL OF THERMAL SPRAY TECHNOLOGY | 1997年 / 6卷 / 02期

关键词：

alumina; chromia; corrosion properties; sealed coatings; wear resistance;

D O I：

10.1007/s11666-997-0014-8

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Plasma-sprayed aluminum oxide (Al2O3) and chromium oxide (Cr2O3) coatings were sealed by aluminum phosphates. Phosphates were formed throughout the coating, down to the substrate, and were verified by scanning electron microscopy and hardness measurements. The sealing increased the hardness of the coatings by 200 to 300 Vickers hardness (HV) units. Abrasion and erosion wear resistances were increased by the sealing treatment. Sealing also substantially closed the open porosity, as shown in electrochemical corrosion tests. The sealed structures had good resistance against corrosion during 30 days of immersion in both acidic and alkaline solutions with pH values from 0 to 10. No decrease in abrasion wear resistance was observed after immersion.

引用

页码：205 / 210

页数：6

共 13 条

[1] STRUCTURE AND PROPERTIES OF OXIDE COATINGS DENSIFIED WITH PHOSPHATE BINDERS [J].

BORISOVA, AL ;

TKACHENKO, AA .

SOVIET POWDER METALLURGY AND METAL CERAMICS, 1987, 26 (11) :888-892

[2] PLASMA-SPRAYED WEAR-RESISTANT CERAMIC AND CERMET COATING MATERIALS [J].

DING, CX ;

HUANG, BT ;

LIN, HL .

THIN SOLID FILMS, 1984, 118 (04) :485-493

[3]

HUDSON RB, 1978, ENCY CHEM TECHNOL KI, V17, P426

[4]

HUTCHINGS IM, 1992, EROSION CERAMIC MAT, P75

[5]

KUMPULAINEN E, 1995, THERMAL SPRAY SCI TE, P579

[6] THE RELATIONSHIP BETWEEN THE MECHANISM OF FORMATION, MICROSTRUCTURE AND PROPERTIES OF PLASMA-SPRAYED COATINGS [J].

MCPHERSON, R .

THIN SOLID FILMS, 1981, 83 (03) :297-310

[7] CHEMISTRY AND BINDING PROPERTIES OF ALUMINUM PHOSPHATES [J].

MORRIS, JH ;

PERKINS, PG ;

ROSE, AEA ;

SMITH, WE .

CHEMICAL SOCIETY REVIEWS, 1977, 6 (02) :173-194

[8]

NIEMI K, 1994, THERMAL SPRAY IND AP, P533

[9]

NIEMI K, 1995, THERMAL SPRAY CURREN, P687

[10]

Schutz H. G., 1991, Materials and Manufacturing Processes, V6, P649, DOI 10.1080/10426919108934795

← 1 2 →