Absorption and crystallinity of poly(3-hexylthiophene)/fullerene blends in dependence on annealing temperature

被引:58
作者
Erb, T
Zhokhavets, U
Hoppe, H
Gobsch, G
Al-Ibrahim, M
Ambacher, O
机构
[1] Tech Univ Ilmenau, Inst Phys, D-98693 Ilmenau, Germany
[2] Ctr Micro & Nanotechnol, D-98693 Ilmenau, Germany
关键词
plastic solar cell; thiophene; PCBM; crystallinity;
D O I
10.1016/j.tsf.2005.12.064
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Composite films of P3HT/PCBM (poly[3-hexylthiophene-2,5-diyl]/[6,6]-phenyl C-61 butyric acid methyl ester) are widely used as active layer in plastic solar cells. It was shown that the annealing of the active layer leads to increased optical absorption and therefore to improved performance of solar cells. However the origin of the improved optical absorption is not clear yet. In this work, structural and optical properties of such films were studied by X-ray diffraction and spectroscopic ellipsometry, respectively. The influence of the annealing temperature on film crystallinity and on optical absorption was studied. A direct correlation between optical absorption and film crystallinity was demonstrated, i.e. increased crystallinity leads to an increased optical absorption. The highest crystallinity and the highest optical absorption were observed for films annealed at 125 degrees C. (c) 2005 Elsevier B.V All rights reserved.
引用
收藏
页码:483 / 485
页数:3
相关论文
共 13 条
  • [1] Structural anisotropy of poly(alkylthiophene) films
    Aasmundtveit, KE
    Samuelsen, EJ
    Guldstein, M
    Steinsland, C
    Flornes, O
    Fagermo, C
    Seeberg, TM
    Pettersson, LAA
    Inganäs, O
    Feidenhans'l, R
    Ferrer, S
    [J]. MACROMOLECULES, 2000, 33 (08) : 3120 - 3127
  • [2] Effects of solvent and annealing on the improved performance of solar cells based on poly(3-hexylthiophene): Fullerene
    Al-Ibrahim, M
    Ambacher, O
    Sensfuss, S
    Gobsch, G
    [J]. APPLIED PHYSICS LETTERS, 2005, 86 (20) : 1 - 3
  • [3] Flexible large area polymer solar cells based on poly(3-hexylthiophene)/fullerene
    Al-Ibrahim, M
    Roth, HK
    Zhokhavets, U
    Gobsch, G
    Sensfuss, S
    [J]. SOLAR ENERGY MATERIALS AND SOLAR CELLS, 2005, 85 (01) : 13 - 20
  • [4] Organic photovoltaics: technology and market
    Brabec, CJ
    [J]. SOLAR ENERGY MATERIALS AND SOLAR CELLS, 2004, 83 (2-3) : 273 - 292
  • [5] Influence of nanomorphology on the photovoltaic action of polymer-fullerene composites
    Chirvase, D
    Parisi, J
    Hummelen, JC
    Dyakonov, V
    [J]. NANOTECHNOLOGY, 2004, 15 (09) : 1317 - 1323
  • [6] Correlation between structural and optical properties of composite polymer/fullerene films for organic solar cells
    Erb, T
    Zhokhavets, U
    Gobsch, G
    Raleva, S
    Stühn, B
    Schilinsky, P
    Waldauf, C
    Brabec, CJ
    [J]. ADVANCED FUNCTIONAL MATERIALS, 2005, 15 (07) : 1193 - 1196
  • [7] Structural and optical properties of both pure poly (3-octylthiophene) (P3OT) and P3OT/fullerene films
    Erb, T
    Raleva, S
    Zhokhavets, U
    Gobsch, G
    Stühn, B
    Spode, M
    Ambacher, O
    [J]. THIN SOLID FILMS, 2004, 450 (01) : 97 - 100
  • [8] Nanoscale morphology of conjugated polymer/fullerene-based bulk-heterojunction solar cells
    Hoppe, H
    Niggemann, M
    Winder, C
    Kraut, J
    Hiesgen, R
    Hinsch, A
    Meissner, D
    Sariciftci, NS
    [J]. ADVANCED FUNCTIONAL MATERIALS, 2004, 14 (10) : 1005 - 1011
  • [9] HOPPE H, 2004, THIN SOLID FILMS, V589, P451
  • [10] Effects of postproduction treatment on plastic solar cells
    Padinger, F
    Rittberger, RS
    Sariciftci, NS
    [J]. ADVANCED FUNCTIONAL MATERIALS, 2003, 13 (01) : 85 - 88