Heterogeneous in situ stress magnitudes due to the presence of weak natural discontinuities in granitic rocks

被引:16
作者
Chang, Chandong [1 ]
Jo, Yeonguk [1 ]
机构
[1] Chungnam Natl Univ, Dept Geol, Taejon 305764, South Korea
关键词
In situ stress; Natural fracture; Fault; Slip tendency; Friction; HYDRAULIC FRACTURING MEASUREMENTS; REGIONAL STRESS; HORIZONTAL STRESS; SUGGESTED METHODS; TENSILE-STRENGTH; DRILLING PROJECT; PRINCIPAL STRESS; PORE PRESSURE; FAULT; ORIENTATION;
D O I
10.1016/j.tecto.2015.08.044
中图分类号
P3 [地球物理学]; P59 [地球化学];
学科分类号
0708 ; 070902 ;
摘要
Two field examples of hydraulic fracturing stress measurements are reported, in which the determined stress magnitudes exhibit severe variations with depth. The stress measurements were conducted in vertical boreholes drilled in granites in two different locations in South Korea. Several isolated intervals of intact rocks in the boreholes were vertically fractured by injecting water. The magnitudes of the minimum horizontal principal compressive stress (S-hmin) were determined from shut-in pressures. The magnitudes of the maximum horizontal principal compressive stress (S-Hmax) were estimated based on the Kirsch equation using tensile strengths determined from hollow cylinder tests and Brazilian tests, in which pressurization-rate effects on tensile strength were taken into account. The stress states in both locations are in reverse-faulting stress regimes. The magnitudes of SHmax are generally within a stress range defined by frictional limits of favorably oriented fractures having frictional coefficients of 0.6 and 1.0. However, S-Hmax magnitudes do not increase linearly with depth, but rather scatter quite severely. It is noted that near the depths where the measured stresses are relatively low, natural discontinuities with wide apertures containing weak filling material exist, whereas near the depths of high stress, such wide discontinuities are scarce. Wide aperture discontinuities are predominantly oriented such that their slip tendency is high under the given stress conditions, meaning that if excessive shear stress is exerted, the weak discontinuities would slip to release the excessive stress. Such local processes would restrict S-Hmax magnitudes within values that can only be sustained by the shear strengths of the discontinuities, leading to severe variations of SHmax with depth. This result suggests that stress magnitudes are controlled quite locally by the frictional property of natural discontinuities, and that the stress state in granitic rock might be inherently heterogeneous because of the heterogeneous distribution of natural discontinuities having various frictional properties. (C) 2015 Elsevier B.V. All rights reserved.
引用
收藏
页码:83 / 97
页数:15
相关论文
共 54 条
[1]  
[Anonymous], P 31 US S ROCK MECH
[3]   INTERPRETATION OF HYDRAULIC FRACTURING PRESSURE TIME RECORDS USING INTERACTIVE ANALYSIS-METHODS [J].
BAUMGARTNER, J ;
ZOBACK, MD .
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES & GEOMECHANICS ABSTRACTS, 1989, 26 (06) :461-469
[4]  
BIENIAWSKI ZT, 1978, INT J ROCK MECH MIN, V15, P99
[5]   FRICTIONAL SLIP OF GRANITE AT HYDROTHERMAL CONDITIONS [J].
BLANPIED, ML ;
LOCKNER, DA ;
BYERLEE, JD .
JOURNAL OF GEOPHYSICAL RESEARCH-SOLID EARTH, 1995, 100 (B7) :13045-13064
[6]  
Breckels I., 1983, J PET TECHNOL, V34, P2191
[7]  
BREDEHOEFT JD, 1976, GEOL SOC AM BULL, V87, P250, DOI 10.1130/0016-7606(1976)87<250:HFTDTR>2.0.CO
[8]  
2
[9]   SOME INFLUENCES OF STRATIGRAPHY AND STRUCTURE ON RESERVOIR STRESS ORIENTATION [J].
BRUNO, MS ;
WINTERSTEIN, DF .
GEOPHYSICS, 1994, 59 (06) :954-962
[10]   FRICTION OF ROCKS [J].
BYERLEE, J .
PURE AND APPLIED GEOPHYSICS, 1978, 116 (4-5) :615-626