Examining the physical meaning of the bank erosion coefficient used in meander migration modeling

Widely used models of meander evolution relate migration rate to vertically averaged near-bank velocity through the use of a coefficient of bank erosion (E). In applications to floodplain management problems, E is typically determined through calibration to historical planform changes, and thus its physical meaning remains unclear. This study attempts to clarify the extent to which E depends on measurable physical characteristics of the channel boundary materials using data from the Sacramento River, California, USA. Bend-average values of E were calculated from measured long-term migration rates and computed near-bank velocities. In the field, unvegetated bank material resistance to fluvial shear (k) was measured for four cohesive and noncohesive bank types using a jet-test device. At a small set of bends for which both E and k were obtained, we discovered that variability in k explains much of the variability in E. The form of this relationship suggests that when modeling long-term meander migration of large rivers, E depends largely on bank material properties. This finding opens up the possibility that E may be estimated directly from field data, enabling prediction of meander migration rates for systems where historical data are unavailable or controlling conditions have changed. Another implication is that vegetation plays a limited role in affecting long-term meander migration rates of large rivers like the Sacramento River. These hypotheses require further testing with data sets from other large rivers. (C) 2008 Elsevier B.V. All rights reserved.