The thermal decomposition of K0.5Bi0.5TiO3 ceramics

被引:93
作者
Konig, J. [1 ]
Spreitzer, M. [1 ]
Jancar, B. [1 ]
Suvorov, D. [1 ]
Samardzija, Z. [1 ]
Popovic, A. [1 ]
机构
[1] Jozef Stefan Inst, SI-1000 Ljubljana, Slovenia
关键词
Bi0.5K0.5TiO3; Perovskites; Firing; Sintering; Inclusions; IONIZATION CROSS-SECTIONS; PIEZOELECTRIC PROPERTIES; LEAD;
D O I
10.1016/j.jeurceramsoc.2008.10.002
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
The high-temperature behaviour of K0.5Bi0.5TiO3, prepared using a conventional solid-state reaction method, was investigated using X-ray powder diffraction, scanning electron microscopy, wavelength-dispersive X-ray spectroscopy and Knudsen effusion combined with mass spectrometry. The results revealed the formation of an off-stoichiometric matrix phase with an excess of bismuth and a deficit of potassium compared to the stoichiometric K0.5Bi0.5TiO3 during the solid-state reaction. During the thermal treatment potassium and bismuth vapours were detected over the solid sample and related to the thermal decomposition of the matrix phase. The losses of the potassium and bismuth components shifted the nominal composition to a three-phase region, and as a result, K2Ti6O13 and a new Bi-rich ternary phase were formed in the system, the latter being formed after prolonged sintering. Differential thermal analyses and heating-microscope analyses showed a narrow sintering-temperature range limited by the melting of the sample above 1040 degrees C. (C) 2008 Elsevier Ltd. All rights reserved.
引用
收藏
页码:1695 / 1701
页数:7
相关论文
共 21 条
[1]   Study on the formation and growth of potassium titanate whiskers [J].
Bao, NZ ;
Feng, X ;
Lu, XH ;
Yang, ZH .
JOURNAL OF MATERIALS SCIENCE, 2002, 37 (14) :3035-3043
[2]   High-temperature mass spectrometry: Instrumental techniques, ionization cross-sections, pressure measurements, and thermodynamic data - (IUPAC technical report) [J].
Drowart, J ;
Chatillon, C ;
Hastie, J ;
Bonnell, D .
PURE AND APPLIED CHEMISTRY, 2005, 77 (04) :683-737
[3]   Na0.5Bi0.5TiO3-K0.5Bi0.5TiO3 (NBT-KBT) system: A structural and electrical study [J].
Elkechai, O ;
Manier, M ;
Mercurio, JP .
PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE, 1996, 157 (02) :499-506
[4]  
Gao F, 2006, J INORG MATER, V21, P1134
[5]   Ferroelectric and piezoelectric properties of (Bi1/2K1/2)TiO3 ceramics [J].
Hiruma, Y ;
Aoyagi, R ;
Nagata, H ;
Takenaka, T .
JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS BRIEF COMMUNICATIONS & REVIEW PAPERS, 2005, 44 (7A) :5040-5044
[6]   Sol-gel-hydrothermal synthesis and sintering of K0.5Bi0.5TiO3 nanowires [J].
Hou, Lei ;
Hou, Yu-Dong ;
Song, Xue-Mei ;
Zhu, Man-Kang ;
Wang, Hao ;
Yan, Hui .
MATERIALS RESEARCH BULLETIN, 2006, 41 (07) :1330-1336
[7]   Comparative study of K0.5Bi0.5TiO3 nanoparticles derived from sol-gel-hydrothermal and sol-gel routes [J].
Hou, YD ;
Hou, L ;
Huang, SY ;
Zhu, MK ;
Wang, H ;
Yan, H .
SOLID STATE COMMUNICATIONS, 2006, 137 (12) :658-661
[8]   A structural study of the (Na1-xKx)0.5Bi0.5TiO3 perovskite series as a function of substitution (x) and temperature [J].
Jones, GO ;
Kreisel, J ;
Thomas, PA .
POWDER DIFFRACTION, 2002, 17 (04) :301-319
[9]   Dielectric relaxor properties of K0.5Bi0.5TiO3 ferroelectrics prepared by sol-gel method [J].
Li, ZF ;
Wang, CL ;
Zhong, WL ;
Li, JC ;
Zhao, ML .
JOURNAL OF APPLIED PHYSICS, 2003, 94 (04) :2548-2552
[10]  
Merlet C, 1992, MIKROCHIM ACTA, P107