A transformer performs many functions such as voltage transformation, isolation, and noise decoupling, and it is an indispensable component in electric power distribution systems. However, at low frequencies (60/50 Hz), it is a bulky and expensive component. In this paper, the concept of electronic transformers is further extended and explored for its suitability in power distribution systems. It should be noted that from the input/output behavior, the electronic transformer and the conventional transformer are identical. Possible topologies employing static converters connected on the primary and secondary sides are explored to realize high-frequency operation of the magnetic core. To assist the commutation process, a four-step switching has been developed which does not require the use of snubbers, Reduced size, losses, higher efficiency, and better voltage regulation are some of the advantages of this approach. A 10-kVA design example along with experiment results are discussed. It is shown that a transformer designed with a conventional grain-oriented silicon-steel core can process three times the power at 1-kHz operating frequency as compared to 60 Hz, The proposed method is scalable in voltage/current with the currently available insulated gate bipolar transistor (IGBT) devices connected in series without special snubbers.
