Removal of heavy metal ions from water by using poly(ethyleneglycol dimethacrylate-co-acrylamide) beads

Poly(ethyleneglycol dimethacrylate-co-acrylamide) (poly(EDGMA-co-AAm)) copolymer beads have been prepared for use in the separation Pb(II), Hg(II), and Cd(II), metal ions in aqueous solution by a batch equilibration technique. Adsorption capacity were increased with pH for Pb(II), Cd(II) and Hg(II) and then reached almost plateau value around 6.0. The high initial rate of metal ions uptake (<10 min) suggests that the adsorption occurs mainly at the bead surface. The metal uptake results show that poly(EGDMA-co-AAm) can be used for the adsorption of the following metals in the indicated order: Pb(II) > Cd(II) > Hg(II) expressed on a molar basis. However, when the uptake was expressed in terms of the amount of metal removed from solution was as follows: Pb(II) > Hg(II) > Cd(II). The beads still showed preference toward Pb(II) when this metal was in a mixture with Hg(II) and Cd(II). A linearized form of the Freundlich and the Langmuir isotherm model fits the experimental equilibrium concentration data of Hg(II) and Cd(II) better than isotherm type model of Pb(II). The recovery of the metal ions after adsorption and the regeneration of the adsorbent can be carried out by treatment of the loaded beads with either 0.5 M NaCl, or 1 M HNO3. (C) 2002 Elsevier Science Ltd. All rights reserved.