Four-quadrant control of a switched reluctance motor for a highly dynamic actuator load

被引:11
作者
Hossain, S [1 ]
Husain, I [1 ]
Klode, H [1 ]
Lequesne, B [1 ]
Omekanda, A [1 ]
机构
[1] Univ Akron, Dept Elect Engn, Akron, OH 44325 USA
来源
APEC 2002: SEVENTEENTH ANNUAL IEEE APPLIED POWER ELECTRONICS CONFERENCE AND EXPOSITION, VOLS 1 AND 23 | 2002年
关键词
D O I
10.1109/APEC.2002.989225
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 [动力工程及工程热物理]; 0820 [石油与天然气工程];
摘要
A four-quadrant controller for Switched Reluctance Motor (SRM) drives with optimal turn-on and turn-off angles for each operating quadrant is presented in this paper. The firing angles are chosen to maximize the average torque produced by the motor, which requires the optimization of the area of the energy conversion loop. The four-quadrant SR controller developed with the chosen optimization criterion gives fast motoring response as well as fast braking response. The underlying contribution of this paper is the development and solution of an optimal control problem to provide the best control strategies. The paper also provides the specific guideline to switch the firing angle position when the motor operation changes from one quadrant to another. The developed four-quadrant controller has been applied to control the linear displacement of a highly dynamic actuator load.
引用
收藏
页码:41 / 47
页数:7
相关论文
共 6 条
[1]
HAIQING Y, IEEE APEC C P 1996, P956
[2]
Unbalanced force calculation in switched-reluctance machines [J].
Husain, I ;
Radun, A ;
Nairus, J .
IEEE TRANSACTIONS ON MAGNETICS, 2000, 36 (01) :330-338
[3]
KJAER PC, 1997, IEEE ASME T MECHATRO, V2
[4]
DESIGN CONSIDERATIONS FOR THE SWITCHED RELUCTANCE MOTOR [J].
RADUN, AV .
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 1995, 31 (05) :1079-1087
[5]
Advantages of switched reluctance motor applications to EV and HEV: Design and control issues [J].
Rahman, KM ;
Fahimi, B ;
Suresh, G ;
Rajarathnam, AV ;
Ehsani, M .
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2000, 36 (01) :111-121
[6]
STATON DA, 1993, IAS 93, PTS 1-3, P185, DOI 10.1109/IAS.1993.298922