Influence of ash composition on heavy metal emissions in ash melting process

Two kinds of fly ash, discharged in the combustion of either refused derived fuel (RDF) or car shredder dust (SD), were examined for the emission of heavy metals in melting process under oxidizing and reducing conditions. The residual fractions of heavy metal in slag were experimentally estimated. As a result, it was confirmed that several volatile heavy metals were readily emitted during melting process. The type of atmosphere provided for the melting process was found to affect the emission of some volatile metals in RIDE ash, but not in SD ash. The emission of volatile heavy metals in RIDE ash under oxidizing conditions was lower than under any other conditions in this study. The emission behavior of iron and heavy metals in RDF ash under reducing conditions was similar to that in SD ash. These facts indicated that phosphorous in RIDE ash had the property of fixing the volatile metals in the slag only under oxidizing conditions. Then the mixture of SD ash with phosphorous oxide powder was also tested in a melting process, and the result was consistent with the above inference of the effect of phosphorous. (C) 2002 Elsevier Science Ltd. All rights reserved.