Effect of moisture content on the properties of silanized jute-epoxy composites

被引:112
作者
Gassan, J [1 ]
Bledzki, AK [1 ]
机构
[1] UNIV GESAMTHSCH KASSEL,INST WERKSTOFFTECH KUNSTSTOFF & RECYCLINGTECH,D-34109 KASSEL,GERMANY
关键词
D O I
10.1002/pc.10272
中图分类号
TB33 [复合材料];
学科分类号
摘要
The composites investigated in this article were epoxy resins reinforced with jute-fibers. The jute-fibers were modified with an epoxyfunctional-gamma-glycidoxypropyltrimethoxy-silane (A-187 from Osi-Specialtis GmbH, Germany), which works as a coupling agent between fiber and matrix. The introduction of the coupling agent distinctly influences the mechanical properties of the composite: Dynamic modulus was doubled, damping was reduced by about 50%, and the Wohler curves showed fatigue limits increased by about 20%. The investigations pointed out further that the moisture uptake of composites with silanized fibers was reduced by about 10-20%. Moisture at equilibrium and kinetics of absorption increase with increasing fiber content. Finally, the application of the coupling agent caused a reduction of moisture effects on mechanical properties. Tensile strength, tensile modulus, and fatigue strength under repeated tensile stress were reduced up to 30%. This tendency was not duplicated in the results for flexural strength and flexural modulus.
引用
收藏
页码:179 / 184
页数:6
相关论文
共 43 条
[1]  
[Anonymous], 1987, POLYM COMPOS
[2]  
[Anonymous], INT ENCY COMPOSITES
[3]  
[Anonymous], HDB FIBER SCI TECHNO
[4]   EFFECT OF CORONA MODIFICATION ON THE MECHANICAL-PROPERTIES OF POLYPROPYLENE CELLULOSE COMPOSITES [J].
BELGACEM, MN ;
BATAILLE, P ;
SAPIEHA, S .
JOURNAL OF APPLIED POLYMER SCIENCE, 1994, 53 (04) :379-385
[5]   THE EFFECT OF SILANE TREATMENT ON THE MECHANICAL AND PHYSICAL-PROPERTIES OF SISAL-EPOXY COMPOSITES [J].
BISANDA, ETN ;
ANSELL, MP .
COMPOSITES SCIENCE AND TECHNOLOGY, 1991, 41 (02) :165-178
[6]  
BLDEZKI AK, IN PRESS EXPT MECH
[7]  
Bledzki AK, 1996, J APPL POLYM SCI, V59, P1329, DOI 10.1002/(SICI)1097-4628(19960222)59:8<1329::AID-APP17>3.0.CO
[8]  
2-0
[9]  
BLEDZKI AK, 1995, MATERIALPRUFUNG, V37, P360
[10]  
BROWNING CE, 1976, ASTM SPE, V617