Speciation of chromium in water samples by cloud point extraction combined with low temperature electrothermal vaporization ICP-OES

A new method based on cloud point extraction ( CPE) separation and electrothermal vaporization inductively coupled plasma optical emission spectrometry ( ETV-ICP-OES) detection was proposed for the determination of chromium species. Thenoyltrifluoracetone ( TTA) was used as both an extractant for CPE of Cr( III) and a chemical modifier for ETV-ICP-OES determination. When the system temperature is higher than the cloud point temperature ( CPT) of the selected surfactant, Triton X-114, the complex of Cr( III) with TTA could enter the surfactant-rich phase, whereas the Cr( VI) remained in aqueous solutions. Thus, an in situ separation of Cr( III) and Cr( VI) could be realized. The concentrated analyte was introduced into ETV-ICP-OES for determination of Cr( III) after proper disposal. Cr( VI) is reduced to Cr( III) prior to determining total Cr, and its assay is based on substracting of Cr( III) from total chromium. The main factors affecting cloud point extraction and the vaporization behavior of the analyte were investigated in detail. Under the optimized conditions, the limit of detection ( LOD) for Cr( III) was 0.22 mu g/L by preconcentration of a 10mL sample solution, and the relative standard deviation ( RSD) was 3.8% ( C-Cr( III) 0.5mg/mL, n = 5). The proposed method was applied to the speciation of chromium in different water samples. In order to verify the accuracy of the method, a certified reference water sample was analyzed, and the results obtained were in good agreement with certified values.