Microstructure and electrical conductivity of LaNi0.6Fe0.4O3 prepared by combustion synthesis routes

被引：40

作者：

Basu, RN ^{[1
]}

Tietz, F ^{[1
]}

Wessel, E ^{[1
]}

Buchkremer, HP ^{[1
]}

Stöver, D ^{[1
]}

机构：

[1] Forschungszentrum Julich, Inst Mat & Proc Energy Syst, IWV, D-52425 Julich, Germany

来源：

MATERIALS RESEARCH BULLETIN | 2004年 / 39卷 / 09期

关键词：

oxides; chemical synthesis; electrical properties; thermal expansion;

D O I：

10.1016/j.materresbull.2004.03.015

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The continuing development of new materials suitable for solid oxide fuel cells operating at about 650-800 degreesC is of great interest in recent days. The present investigation deals with the development of a perovskite composition-LaNi0.6Fe0.4O3 (LNF)-prepared following two combustion synthesis routes: citrate-gel (LNC) and urea (LNU). The powders were sintered over a wide temperature range (900-1400 degreesC) and sintering behavior for LNC and LNU was compared. The thermal expansion coefficient (TEC), electrical and microstructural characteristics of LNF was thoroughly investigated. Electrical conductivities were found to be one and a half times higher than that of most commonly used cathode material, La(Sr)MnO3. Moreover, the TEC value of LNF was found to be approximate to11.4 x 10(-6) K-1 at 800 degreesC. The study opens up a possibility of using LNF as a promising cell component for SOFC. (C) 2004 Elsevier Ltd. All rights reserved.

引用

页码：1335 / 1345

页数：11

共 17 条

[1]

Anderson H. U., 1995, Proceedings of the Fourth International Symposium on Solid Oxide Fuel Cells (SOFC-IV), P375

[2]

ARAKAWA M, 1999, 1999 MRS SPRING M AB, P447

[3] Studies on combustion synthesized LaMnO3-LaCoO3 solid solutions [J].

Aruna, ST ;

Muthuraman, M ;

Patil, KC .

MATERIALS RESEARCH BULLETIN, 2000, 35 (02) :289-296

[4]

Avakyan PB, 1996, AM CERAM SOC BULL, V75, P50

[5]

Badwal S.P.S., 1997, Mater. Forum, V21, P187

[6] Interface reactions during co-firing of solid oxide fuel cell components [J].

Basu, RN ;

Tietz, F ;

Wessel, E ;

Stöver, D .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2004, 147 (01) :85-89

[7] LaNi0.6Fe0.4O3 as a cathode contact material for solid oxide fuel cells [J].

Basu, RN ;

Tietz, F ;

Teller, O ;

Wessel, E ;

Buchkremer, HP ;

Stöver, D .

JOURNAL OF SOLID STATE ELECTROCHEMISTRY, 2003, 7 (07) :416-420

[8] Low temperature sintering of La(Ca) CrO3 prepared by an autoignition process [J].

Chakraborty, A ;

Basu, RN ;

Maiti, HS .

MATERIALS LETTERS, 2000, 45 (3-4) :162-166

[9] An investigation of LaNi1-xFexO3 as a cathode material for solid oxide fuel cells [J].

Chiba, R ;

Yoshimura, F ;

Sakurai, Y .

SOLID STATE IONICS, 1999, 124 (3-4) :281-288

[10] Intermediate temperature SOFC - a promise for the 21st century [J].

Huijsmans, JPP ;

van Berkel, FPF ;

Christie, GM .

JOURNAL OF POWER SOURCES, 1998, 71 (1-2) :107-110

← 1 2 →