A High-Efficiency Multimode Li-Ion Battery Charger With Variable Current Source and Controlling Previous-Stage Supply Voltage

被引：72

作者：

Chen, Jiann-Jong ^{[1
]}

Yang, Fong-Cheng ^{[1
]}

Lai, Chien-Chih ^{[1
]}

Hwang, Yuh-Shyan ^{[1
]}

Lee, Ren-Guey ^{[1
]}

机构：

[1] Natl Taipei Univ Technol, Dept Elect Engn, Taipei 106, Taiwan

来源：

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS | 2009年 / 56卷 / 07期

关键词：

Adaptive reference voltage; Li-Ion charger; variable current source; INTELLIGENT; COMPACT; DESIGN;

D O I：

10.1109/TIE.2009.2018435

中图分类号：

TP [自动化技术、计算机技术];

学科分类号：

080201 [机械制造及其自动化];

摘要：

A high-efficiency multimode Li-Ion battery charger with variable current source and controlling previous-stage supply voltage is presented in this paper. Using variable current source can achieve the goal of constant-current mode to charge the battery and control previous-stage supply voltage which could increase the efficiency of the multimode battery charger. Moreover, the charging mode adopted in this charger is applied by two types of dual-mode strategy decided by the value of the equivalent series resistance of the Li-Ion battery. This technique will reduce the damage of Li-Ion battery. The Li-Ion battery charger is designed with 0.35-mu m CMOS double-poly four-metal processes. The experimental results show that the charger works well and the theoretical analysis can be confirmed. The average power efficiency of the multimode Li-Ion battery charger can be up to 91.2% under the average power of 1.24 W, and the accuracy of the adaptive reference voltage is up to 97.3%. The chip area is only 1.32 x 0.95 mm(2).

引用

页码：2469 / 2478

页数：10

共 22 条

[1]

A noncontact charger using a resonant converter with parallel capacitor of the secondary coil [J].

Abe, H ;

Sakamoto, H ;

Harada, K .

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2000, 36 (02) :444-451

[2]

PLL-based battery charge circuit topology [J].

Chen, LR .

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2004, 51 (06) :1344-1346

[3]

Accurate, compact, and power-efficient Li-ion battery charger circuit [J].

Chen, Min ;

Rincon-Mora, Gabriel A. .

IEEE TRANSACTIONS ON CIRCUITS AND SYSTEMS II-EXPRESS BRIEFS, 2006, 53 (11) :1180-1184

[4]

A novel rapid charger for lead-acid batteries with energy recovery [J].

Chiu, Huang-Jen ;

Lin, Li-Wei ;

Pan, Ping-Lung ;

Tseng, Ming-Hsiang .

IEEE TRANSACTIONS ON POWER ELECTRONICS, 2006, 21 (03) :640-647

[5]

Design and implementation of low-profile contactless battery charger using planar printed circuit board windings as energy transfer device [J].

Choi, B ;

Nho, J ;

Cha, HY ;

Ahn, T ;

Choi, S .

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2004, 51 (01) :140-147

[6]

A novel high-efficiency battery charger with a buck zero-voltage-switching resonant converter [J].

Chuang, Ying-Chun ;

Ke, Yu-Lung .

IEEE TRANSACTIONS ON ENERGY CONVERSION, 2007, 22 (04) :848-854

[7]

Intelligent and universal fast charger for Ni-Cd and Ni-MH batteries in portable applications [J].

Díaz, J ;

Martín-Ramos, JA ;

Pernía, AM ;

Nuño, F ;

Linera, FF .

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2004, 51 (04) :857-863

[8]

Egan MG, 2007, IEEE T IND ELECTRON, V54, P1217, DOI 10.1109/TIE.2007.892996

[9]

New compact CMOS Li-ion battery charger using charge-pump technique for portable applications [J].

Hwang, Yuh-Shyan ;

Wang, Shu-Chen ;

Yang, Fong-Cheng ;

Chen, Jiann-Jong .

IEEE TRANSACTIONS ON CIRCUITS AND SYSTEMS I-REGULAR PAPERS, 2007, 54 (04) :705-712

[10]

Isaacson M., 2000, Battery Conference on Applications and Advances, P193, DOI 10.1109/BCAA.2000.838403

← 1 2 3 →