Fourier transform infrared spectroscopy and solid phase extraction applied to the determination of oil and grease in water matrices

The solid phase extraction as a solvent-free method for the analysis of oil and grease in waters was studied. The use of a PTFE surface as a solid phase allows the retention of the volatile fraction of oil and grease, and further analysis of carbon-hydrogen bonds using infrared spectroscopy can be done on the surface. Various oils and grease samples were tested: n-hexadecane, n-tetradecane, n-nonadecane, n-docosane, isooctane, diesel oil and gasoline. Temperatures from 25 to 90 C and a range of heating times were checked for extraction. Precision tests showed relative standard deviation values of around 10% in several samples of the same concentration. Calibration lines of n-hexadecane showed high correlation coefficients from 0.9 to 30 mg/1. Recoveries for the various oils using different calibration lines showed values from 90 to 110%. The method described here is fast and clean, and allows reproducible measurements of oil and grease in water that do not require the use of a solvent.