Development of new metal/polymer materials for rapid tooling using Fused deposition modelling

被引：388

作者：

Masood, SH ^{[1
]}

Song, WQ ^{[1
]}

机构：

[1] Swinburne Univ Technol, Ind Res Inst Swinburne, Melbourne, Vic 3122, Australia

来源：

MATERIALS & DESIGN | 2004年 / 25卷 / 07期

关键词：

fused deposition modelling; rapid prototyping; composite material; tensile strength; direct rapid tooling; injection moulding;

D O I：

10.1016/j.matdes.2004.02.009

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper presents the development of a new metal/polymer composite material for use in fused deposition modelling (FDM) process with the aim of application to direct rapid tooling. The material consists of iron particles in a nylon type matrix. The detailed formulation and characterisation of the tensile properties of the various combinations of the new composites are investigated experimentally. The feedstock filaments of this composite have been produced and used successfully in the unmodified FDM system for direct rapid tooling of injection moulding inserts. High quality plastic parts have been injection moulded using the inserts. The work represents a major development in reducing the cost and time in rapid tooling. (C) 2004 Elsevier Ltd. All rights reserved.

引用

页码：587 / 594

页数：8

共 9 条

[1]

Agarwala M. K., 1996, P SOL FREEF FABR S A, P385

[2]

BANDYOPADHYAY A, 1997, J AM CERAM SOC, V80, P366

[3] Effects of processing conditions on short TLCP fiber reinforced FDM parts [J].

Gray, Robert W. ;

Baird, Donald G. ;

Bohn, Jan Helge .

RAPID PROTOTYPING JOURNAL, 1998, 4 (01) :14-25

[4]

JACOBS P, 1997, P 7 INT C RAP PROT, P338

[5]

Lombardi IL, 1997, P SOL FREEF S U TEX, P11

[6] Intelligent rapid prototyping with fused deposition modelling [J].

Masood, Syed H. .

RAPID PROTOTYPING JOURNAL, 1996, 2 (01) :24-33

[7]

Matthews G., 1982, POLYM MIXING TECHNOL

[8]

Tavman IH, 1996, J APPL POLYM SCI, V62, P2161

[9] Feedstock material property - process relationships in fused deposition of ceramics (FDC) [J].

Venkataramana, N. ;

Rangarajan, S. ;

Matthewson, M. J. ;

Harper, B. ;

Safari, A. ;

Danforth, S. C. ;

Wu, G. ;

Langrana, N. ;

Guceri, S. ;

Yardimci, A. .

RAPID PROTOTYPING JOURNAL, 2000, 6 (04) :244-252

← 1 →