The method of hardening soil rippers by surfacing and technical-economic assessment

被引：21

作者：

Jankauskas, V. ^{[1
]}

Katinas, E. ^{[1
]}

Skirkus, R. ^{[1
]}

Alekneviciene, V. ^{[1
]}

机构：

[1] Aleksandras Stulginskis Univ, LT-53361 Akademija, Lithuania

来源：

JOURNAL OF FRICTION AND WEAR | 2014年 / 35卷 / 04期

关键词：

soil cultivation; ripper; abrasive wear; electric arc surfacing; wear-resistant materials; hard alloy; technical-economic assessment; WEAR; PLOWSHARES; REDUCTION;

D O I：

10.3103/S106836661404014X

中图分类号：

TH [机械、仪表工业];

学科分类号：

120111 [工业工程];

摘要：

The wear resistance and feasibility of applying soil rippers have been studied after surfacing for use in the clayey soil. The study illustrates laboratory and production research of standard and novel (with large grain tungsten carbide) material for manual electric arc surfacing. Hardness and wear resistance in the clayey soil have been determined. Rippers (and the components of soil cultivating machinery yield the least wear by using wear-resistant materials and the comprehensive surfacing of tailing and lateral surfaces. It is shown that hard-alloy tips of rippers are better suited for clayey soil, which is the toughest to cultivate. The best wear resistance in clayey soil is found in hard-alloyed layers of Fe-C-Cr-Si-Mo-Nb-W and Fe-C-Mn-B alloys. The wear rate depends on the depth of cultivation and varies exponentially.

引用

页码：270 / 277

页数：8

共 11 条

[1]

[Anonymous], 2006, INTERMEDIATE MICROEC

[2]

Reduction of wear via hardfacing of chisel ploughshare [J].

Bayhan, Y .

TRIBOLOGY INTERNATIONAL, 2006, 39 (06) :570-574

[3]

Effect of cutting edge thickness and state of wear of ploughshare on draught force and heart rates of Sanga oxen in Ghana [J].

Bobobee, Emmanuel Y. H. ;

Gebresenbet, Girma .

SOIL & TILLAGE RESEARCH, 2007, 95 (1-2) :298-307

[4]

High performance tool for liquid manure injection [J].

Chen, Y ;

Ren, X .

SOIL & TILLAGE RESEARCH, 2002, 67 (01) :75-83

[5]

Reduction of mouldboard plough share wear by a combination technique of hardfacing [J].

Horvat, Z. ;

Filipovic, D. ;

Kosutic, S. ;

Emert, R. .

TRIBOLOGY INTERNATIONAL, 2008, 41 (08) :778-782

[6]

Jankauskas V., 2006, Mechanika, P55

[7]

Jankauskas V, 2008, MECHANIKA, P80

[8]

Jankauskas V., 2014, MAT SCI IN PRESS

[9]

Meinel T., 2010, DLZ AGRARMAGAZIN, P7

[10]

Influence of local soil conditions on mouldboard ploughshare abrasive wear [J].

Natsis, A. ;

Petropoulos, G. ;

Pandazaras, C. .

TRIBOLOGY INTERNATIONAL, 2008, 41 (03) :151-157

← 1 2 →