Analytical modeling of damping at micromechanical level in polymer composites reinforced with coated fibers

被引：64

作者：

Finegan, IC ^{[1
]}

Gibson, RF ^{[1
]}

机构：

[1] Wayne State Univ, Dept Mech Engn, Adv Composites Res Lab, Detroit, MI 48202 USA

来源：

COMPOSITES SCIENCE AND TECHNOLOGY | 2000年 / 60卷 / 07期

关键词：

D O I：

10.1016/S0266-3538(00)00003-8

中图分类号：

TB33 [复合材料];

学科分类号：

摘要：

Theoretical models using theory of elasticity, finite-element, and mechanics-of-materials formulations for characterizing the damping loss factor of composites with coated fiber reinforcement are described. The theoretical models are validated through comparison with experimental damping results conducted on composites having coated fibers as reinforcement. Explicit micromechanics equations are presented in order to define the damping and stiffness of unidirectional coated fiber composites under longitudinal normal (LN), transverse normal (TN), transverse shear (TS) and longitudinal shear (LS) loading conditions. Since shear deformation is essential for viscoelastic damping in polymers, and large shear strains are generated near the fiber/matrix interface in composites, it is shown that the use of a viscoelastic polymer coating on the fibers is an effective way of improving damping in such composites. A strain-energy approach was implemented with both a closed-form theory-of-elasticity solution and finite-element numerical simulations in order to carry out the analysis. (C) 2000 Elsevier Science Ltd. All rights reserved.

引用

页码：1077 / 1084

页数：8

共 15 条

[1]

CARTIAN I, 1994, ASME NCA, V18, P73

[2]

Chaturvedi S.K., 1991, COMPOS ENG, V1, P49, DOI [10.1016/0961-9526(91)90025-N, DOI 10.1016/0961-9526(91)90025-N]

[3] RESIDUAL-STRESSES AND THEIR EFFECTS ON DEFORMATION IN PARTICLE-REINFORCED METAL-MATRIX COMPOSITES [J].

DAVIS, LC ;

ALLISON, JE .

METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1993, 24 (11) :2487-2496

[4] ADHESION OF GRAPHITE FIBERS TO EPOXY MATRICES .2. THE EFFECT OF FIBER FINISH [J].

DRZAL, LT ;

RICH, MJ ;

KOENIG, MF ;

LLOYD, PF .

JOURNAL OF ADHESION, 1983, 16 (02) :133-152

[5]

FINEGAN IC, 1997, THESIS WAYNE STATE U

[6]

FINEGAN IC, 1997, 12 ANN ESD ADV COMP, P303

[7]

Gibson R.F., 1994, PRINCIPLES COMPOSITE

[8]

GIBSON RF, 1991, P 36 INT SAMPE S, V1, P592

[9]

Hopkins DA, 1988, ASTM STP, V964, P159

[10]

HWANG SJ, 1992, J COMPOS MATER, V26, P2589

← 1 2 →