Development of the torque accumulation method for a torsional vibration system

被引:3
作者
Satonobu, J
Magane, F
Koike, Y
Nakamura, K
Ueha, S
机构
[1] Precision and Intelligence Laboratory, Tokyo Institute of Technology, Midori-ku
关键词
D O I
10.1109/58.656638
中图分类号
O42 [声学];
学科分类号
070206 ; 082403 ;
摘要
This paper presents a new method to accumulate the output of several torsional transducers together into one output. The torsional transducers are connected around the circumference of a thick metal disk (the accumulator) in which the fundamental torsional mode is excited. The torque of each transducer is transmitted to the accumulator, and the accumulated torque appears on both the top and the bottom surfaces of the accumulator, The authors discuss the torque accumulation and the transformation mechanism analytically by using an equivalent electrical circuit model and obtaining the analytic expression of the torque factor, which represents the maximum output torque per unit voltage applied to the electrical port. In an experimental study, four Langevin torsional transducers 30 mm in diameter attached to an accumulator 100 mm in diameter was used as a prototype. The measured torque factor is found to be proportional to the number of connected transducers, and the calculated torque Factor agrees well with the experimentally determined one.
引用
收藏
页码:1348 / 1354
页数:7
相关论文
共 10 条
[1]   CONSTRUCTION OF TORSIONAL-VIBRATION SYSTEMS WITH A HOLLOW CYLINDRICAL BOLT-CLAMPED LANGEVIN-TYPE TRANSDUCER AND THEIR APPLICATION TO ULTRASONIC PLASTIC WELDING [J].
ADACHI, K ;
SAITO, M .
JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES & REVIEW PAPERS, 1995, 34 (5B) :2735-2739
[2]   DEVELOPMENT OF BOLT-CLAMPED LANGEVIN-TYPE TRANSDUCER WITH HIGH MECHANICAL QUALITY FACTOR FOR EXCITATION OF LARGE TORSIONAL VIBRATION [J].
ADACHI, K ;
KONNO, Y ;
MASAKI, S .
JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES & REVIEW PAPERS, 1994, 33 (02) :1182-1188
[3]  
Graff K. F., 1991, Wave motion in elastic solids
[4]  
ITO K, 1981, JPN J APPL PHYS S20, V20, P173
[5]  
ITOI K, 1973, J ACOUST SOC JPN, V29, P28
[6]  
ITOI K, 1973, J ACOUST SOC JPN, V29, P307
[7]  
MORI E, 1969, P AUT M AC SOC JPN S, P175
[8]  
Nemoto S., 1972, Journal of the Acoustical Society of Japan, V28, P117
[9]  
Nemoto S., 1974, Journal of the Acoustical Society of Japan, V30, P329
[10]  
SHUYU L, 1994, ULTRASONICS, V32, P461