Automotive hydrogen storage system using cryo-adsorption on activated carbon

An integrated model of a sorbent-based cryogenic compressed hydrogen system is used to assess the prospect of meeting the near-term targets of 36 kg-H-2/m(3) volumetric and 4.5 wt% gravimetric capacity for hydrogen-fueled vehicles. The model includes the thermodynamics of H-2 sorption, heat transfer during adsorption and desorption, sorption dynamics, energetics of cryogenic tank cooling, and containment of H-2 in geodesically wound carbon fiber tanks. The results from the model show that recoverable hydrogen, rather than excess or absolute adsorption, is a determining measure of whether a sorbent is a good candidate material for on-board storage of H-2. A temperature swing is needed to recover >80% of the sorption capacity of the superactivated carbon sorbent at 100 K and 100 bar as the tank is depressurized to 3-8 bar. The storage pressure at which the system needs to operate in order to approach the system capacity targets has been deter-mined and compared with the breakeven pressure above which the storage tank is more compact if H-2 is stored only as a cryo-compressed gas. The amount of liquid N-2 needed to cool the hydrogen dispensed to the vehicle to 100 K and to remove the heat of adsorption during refueling has been estimated. The electrical energy needed to produce the requisite liquid N-2 by air liquefaction is compared with the electrical energy needed to liquefy the same amount of H-2 at a central plant. The alternate option of adiabatically refueling the sorbent tank with liquid H-2 has been evaluated to determine the relationship between the storage temperature and the sustainable temperature swing. Finally, simulations have been run to estimate the increase in specific surface area and bulk density of medium needed to satisfy the system capacity targets with H-2 storage at 100 bar. (C) 2009 International Association for Hydrogen Energy. Published by Elsevier Ltd. All rights reserved.