Effects of steaming process on some properties of eucalyptus particleboard bonded with UF and MUF adhesives

被引：31

作者：

Colak, Semra ^{[1
]}

Colakoglu, Gursel ^{[1
]}

Aydin, Ismail ^{[1
]}

Kalaycioglu, Hulya ^{[1
]}

机构：

[1] Karadeniz Tech Univ, Fac Forestry, Forest Ind Engn Sect, TR-61080 Trabzon, Turkey

来源：

BUILDING AND ENVIRONMENT | 2007年 / 42卷 / 01期

关键词：

steaming; eucalyptus; particleboard; mechanical properties;

D O I：

10.1016/j.buildenv.2005.08.013

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

The steaming process, applied to logs before chipping, affected positively the dimensional stability of eucalyptus particleboard whereas, the internal bonding. The modulus of rupture (MOR) and internal bond strength (IB) values of the panels produced from steamed log parts without hardener were found to be higher than those of the panels produced by adding hardener into the urea formaldehyde (UF) glue. The steaming process did not have a clear effect on the IB of the panels bonded with melamine-urea formaldehyde (MUF) resin. The IB values of the panels bonded with MUF resin were higher than those of the panels bonded with UF resin. The MOR values of the MUF-bonded panels were higher than the requirement for general purpose panels. The steaming process caused an extra improvement in the thickness swelling (TS) of the panels bonded with MUF resin, which has higher resistance to water and weather than UF resin. The TS of the panels produced without hardener was half of the value obtained for the panels bonded with hardener-added UF resin. (c) 2005 Elsevier Ltd. All rights reserved.

引用

页码：304 / 309

页数：6

共 28 条

[1]

[Anonymous], 1996, 3122 EN

[2]

[Anonymous], 1993, 317 EN

[3]

[Anonymous], 1993, 319 EN

[4] Activation of wood surfaces for glue bonds by mechanical pre-treatment and its effects on some properties of veneer surfaces and plywood panels [J].

Aydin, I .

APPLIED SURFACE SCIENCE, 2004, 233 (1-4) :268-274

[5]

Aydin I., 2004, THESIS KARADENIZ TU

[6]

CARLL CG, 1996, FPLGTR96

[7] The effects of steaming and drying on the chemical compositions of the Pine (Pinus brutia ten) veneers [J].

Colak, S ;

Colakoglu, G ;

Usta, M .

HOLZ ALS ROH-UND WERKSTOFF, 1996, 54 (06) :422-422

[8] The effect of steaming on some mechanical properties of Okomume plywoods [J].

Colak, S ;

Colakoglu, G .

HOLZ ALS ROH-UND WERKSTOFF, 1996, 54 (05) :332-332

[9]

European Standard [EN], 1993, 310 EN

[10]

Fengel D., 1989, WOOD CHEM ULTRASTRUC

← 1 2 3 →