First stages of bioactivity of glass-ceramics thin films prepared by magnetron sputtering technique

被引:23
作者
Berbecaru, C. [1 ]
Alexandru, H. V. [1 ]
Stan, G. E. [2 ]
Marcov, D. A. [2 ]
Pasuk, I. [2 ]
Ianculescu, A. [3 ]
机构
[1] Univ Bucharest, Fac Phys, Bucharest 077125, Romania
[2] Natl Inst Mat Phys, Bucharest 077125, Romania
[3] Univ Politehn Bucuresti, Fac Appl Chem Mat Sci, Bucharest 060042, Romania
来源
MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS | 2010年 / 169卷 / 1-3期
关键词
Bio-glass; Magnetron sputtering; SBF investigations; PULSED-LASER DEPOSITION; BIOGLASS((R)) 45S5; COATINGS; REACTIVITY; ABLATION; IMPLANTS; TI6AL4V;
D O I
10.1016/j.mseb.2010.01.007
中图分类号
T [工业技术];
学科分类号
120111 [工业工程];
摘要
Implant type coatings were prepared by magnetron sputtering (MS) technique onto medical grade Ti6Al4V alloy substrates starting from biological 45S5 glass system powders. The as-deposited thin layers were annealed 2 h at 700 degrees C in ambient air, followed by a slow cooling (2 degrees C/min) in order to induce crystallization. The behavior of the coatings was investigated by soaking the samples in simulated body fluids (SBF) and extracting them after 24 and 72 h. The changes in the films' structure were investigated by scanning electron microscopy (SEM), X-ray diffraction (XRD), energy dispersive spectroscopy (EDS) analysis and by Fourier transform infrared spectroscopy (FTIR). A pitched, pore free microstructure with 6 mu m agglomerates of submicron grains in a continuous matrix was revealed by the SEM images of the annealed samples. Complex silicates as Na(4)Ca(4)Si(6)O(18)-combeite and phosphates NaCaPO(4) as crystalline phases were identified in the XRD diffraction patterns. In-growths after 24 h show the enrichment in Si-O (s) non-bonding oxygen (NBO). The polymerization reaction in the surface layer appears for the sample immersed 72 h in SBF. No crystalline hydroxyapatite (HA) was evidenced for those samples. Subsequent dissolution processes of the surface layers were noticed from XRD patterns and SEM images. (c) 2010 Elsevier B.V. All rights reserved.
引用
收藏
页码:101 / 105
页数:5
相关论文
共 25 条
[1]
Bioglass thin films for biomimetic implants [J].
Berbecaru, C. ;
Alexandru, H. V. ;
Ianculescu, Adelina ;
Popescu, A. ;
Socol, G. ;
Sima, F. ;
Mihailescu, Ion .
APPLIED SURFACE SCIENCE, 2009, 255 (10) :5476-5479
[2]
In vivo evaluation of titanium implants coated with bioactive glass by pulsed laser deposition [J].
Borrajo, Jacinto P. ;
Serra, Julia ;
Gonzalez, Pio. ;
Leon, Betty ;
Munoz, Fernando M. ;
Lopez, M. .
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE, 2007, 18 (12) :2371-2376
[3]
Effect of pH and ionic strength on the reactivity of Bioglass® 45S5 [J].
Cerruti, M ;
Greenspan, D ;
Powers, K .
BIOMATERIALS, 2005, 26 (14) :1665-1674
[4]
45S5 Bioglass®-derived glass-ceramic scaffolds for bone tissue engineering [J].
Chen, QZZ ;
Thompson, ID ;
Boccaccini, AR .
BIOMATERIALS, 2006, 27 (11) :2414-2425
[5]
Laser ablation and deposition of Bioglass® 45S5 thin films [J].
D'Alessio, L ;
Ferro, D ;
Marotta, V ;
Santagata, A ;
Teghil, R ;
Zaccagnino, M .
APPLIED SURFACE SCIENCE, 2001, 183 (1-2) :10-17
[6]
PLASMA SPRAYED COATINGS OF HYDROXYLAPATITE [J].
DEGROOT, K ;
GEESINK, R ;
KLEIN, CPAT ;
SEREKIAN, P .
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH, 1987, 21 (12) :1375-1381
[7]
Preparation and characterization of sol-gel bioactive glass coating for improvement of biocompatibility of human body implant [J].
Fathi, M. H. ;
Mohammadi, A. Doost .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 474 (1-2) :128-133
[8]
Filho OscarPeitl., 1998, Journal of Biomedical Materials Research, V30, P509
[9]
The story of Bioglass® [J].
Hench, Larry L. .
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE, 2006, 17 (11) :967-978
[10]
BIOCERAMICS - FROM CONCEPT TO CLINIC [J].
HENCH, LL .
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1991, 74 (07) :1487-1510