Industrial Automation using Embedded Systems and Machine-to-Machine, Man-to-Machine (M2M) Connectivity for Improved Overall Equipment Effectiveness (OEE)

被引：5

作者：

Amer, W. ^{[1
]}

Ansari, U. ^{[1
]}

Ghafoor, Abdul ^{[1
]}

机构：

[1] Natl Univ Sci & Technol, Coll Elect & Mech Engn, Rawalpindi, Pakistan

来源：

2009 IEEE INTERNATIONAL CONFERENCE ON SYSTEMS, MAN AND CYBERNETICS (SMC 2009), VOLS 1-9 | 2009年

关键词：

e-Monitoring and e-Management; OEE; dsPIC Microcontroller; Controller Area Network (CAN);

D O I：

10.1109/ICSMC.2009.5346917

中图分类号：

TP3 [计算技术、计算机技术];

学科分类号：

0812 ;

摘要：

Embedded systems in general and microcontrollers in particular are playing a key role in today's industrial automation and remote monitoring era for enhanced productivity and reduced costs. The aim of this paper is to report research at e-Monitoring and e-Management Research Centre (eM(2)RC) at College of E&ME (NUST) on distributed e-Monitoring and e-Management (eM(2)) using Man-to-Machine, Machine-to Machine (M2M) connectivity for industrial automation. The reported system has successfully been developed, tested and implemented in the local Liquefied Petroleum Gas (LPG) industry to improve Overall Equipment Effectiveness (OEE) resulting in an increased overall system efficiency. The research is based on a combination of hardware and software logic in which the hardware implementation emphasizes the role of embedded systems and M2M connectivity for e-Monitoring and e-Management applications. The e-Information is sent to central server and related technicians/managers/executives for immediate decision making to reduce downtimes and improve quality.

引用

页码：4450 / 4454

页数：5

共 11 条

[1]

AHSAN Q, 2003, P QRM 2004, P185

[2]

AMER W, P COMADEM 2003

[3]

AMER W, 2005, P 10 IEEE INT C EM T, P529

[4]

AMER W, 2003, P QRM 2004, P189

[5] STANDARD FIELD BUS NETWORKS FOR INDUSTRIAL APPLICATIONS [J].

CENA, G ;

DURANTE, L ;

VALENZANO, A .

COMPUTER STANDARDS & INTERFACES, 1995, 17 (02) :155-167

[6]

*GROUP E V, CAN AUT INT US MAN

[7] Estimating cutting force from rotating and stationary feed motor currents on a milling machine [J].

Jeong, YH ;

Cho, DW .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2002, 42 (14) :1559-1566

[8]

Johnson CL, 1998, TLS-TIMES LIT SUPPL, P7

[9]

KENNEDY VR, 2000, COMADEM 2000, P877

[10]

MOYNE JR, 1994, SENS EXP C P SEPT

← 1 2 →