In situ formed (CU0.6Zr0.25Ti0.15)93Nb7 bulk metallic glass composites

被引：18

作者：

Bian, Z ^{[1
]}

Ahmad, J ^{[1
]}

Zhang, W ^{[1
]}

Inoue, A ^{[1
]}

机构：

[1] Tohoku Univ, Inst Mat Res, Sendai, Miyagi 9808577, Japan

来源：

MATERIALS TRANSACTIONS | 2004年 / 45卷 / 07期

关键词：

bulk metallic glass composite; ductile dendrite; elongation;

D O I：

10.2320/matertrans.45.2346

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

An in situ formed (Cu0.6Zr0.25Ti0.15)(93)Nb-7 bulk metallic glass (BMG) composite was prepared successfully. The ductile Nb-rich crystalline phase with a dendritic structure disperses homogeneously in the BMG matrix. The mean size of the dendritic Nb phase is about 5similar to10 mum. For Cu-Zr-Ti-Nb glassy ribbons, the additions of Nb element cause the glass transition and crystallization onset temperature to shift to much higher values, and improve the thermal stability of the glassy phase. For the in situ formed (Cu0.6Zr0.25Ti0.15)(93)Nb-7 bulk metallic glass composites, its glass transition temperature and crystallization onset temperature is almost the same as those of the Nb-free Cu60Zr25Ti15 BMG, implying that almost all the added Nb element precipitates from the melt upon cooling. The (Cu0.6Zr0.2Ti0.15)(93)Nb-7 BMG composite also presents a good combination of excellent mechanical properties. The compressive fracture strength and fracture elongation are 2130 MPa and 6.4%, respectively. The increase in elongation results from the homogeneous dispersion of the ductile and dendritic Nb-rich crystalline phase in the BMG matrix.

引用

页码：2346 / 2350

页数：5

共 20 条

[1] Excellent wave absorption by zirconium-based bulk metallic glass composites containing carbon nanotubes [J].

Bian, Z ;

Wang, RJ ;

Pan, MX ;

Zhao, DQ ;

Wang, WH .

ADVANCED MATERIALS, 2003, 15 (7-8) :616-621

[2] Carbon-nanotube-reinforced Zr52.5Cu17.9Ni14.6Al10Ti5 bulk metallic glass composites [J].

Bian, Z ;

Pan, MX ;

Zhang, Y ;

Wang, WH .

APPLIED PHYSICS LETTERS, 2002, 81 (25) :4739-4741

[3] Microstructure and ductile-brittle transition of as-cast Zr-based bulk glass alloys under compressive testing [J].

Bian, Z ;

Chen, GL ;

He, G ;

Hui, XD .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2001, 316 (1-2) :135-144

[4] Mechanical properties of Zr57Nb5Al10Cu15.4Ni12.6 metallic glass matrix particulate composites [J].

Conner, RD ;

Choi-Yim, H ;

Johnson, WL .

JOURNAL OF MATERIALS RESEARCH, 1999, 14 (08) :3292-3297

[5] Nanostructured composites in multicomponent alloy systems [J].

Eckert, J ;

He, G ;

Das, J ;

Löser, W .

MATERIALS TRANSACTIONS, 2003, 44 (10) :1999-2006

[6] Microstructure controlled shear band pattern formation and enhanced plasticity of bulk metallic glasses containing in situ formed ductile phase dendrite dispersions [J].

Hays, CC ;

Kim, CP ;

Johnson, WL .

PHYSICAL REVIEW LETTERS, 2000, 84 (13) :2901-2904

[7] Effect of Ta on glass formation, thermal stability and mechanical properties of a Zr52.25Cu28.5Ni4.75Al9.5Ta5 bulk metallic glass [J].

He, G ;

Zhang, ZF ;

Löser, W ;

Eckert, J ;

Schultz, L .

ACTA MATERIALIA, 2003, 51 (08) :2383-2395

[8] MG-CU-Y AMORPHOUS-ALLOYS WITH HIGH MECHANICAL STRENGTHS PRODUCED BY A METALLIC MOLD CASTING METHOD [J].

INOUE, A ;

KATO, A ;

ZHANG, T ;

KIM, SG ;

MASUMOTO, T .

MATERIALS TRANSACTIONS JIM, 1991, 32 (07) :609-616

[9] Ultra-high strength above 5000 MPa and soft magnetic properties of Co-Fe-Ta-B bulk glassy alloys [J].

Inoue, A ;

Shen, BL ;

Koshiba, H ;

Kato, H ;

Yavari, AR .

ACTA MATERIALIA, 2004, 52 (06) :1631-1637

[10] Cobalt-based bulk glassy alloy with ultrahigh strength and soft magnetic properties [J].

Inoue, A ;

Shen, BL ;

Koshiba, H ;

Kato, H ;

Yavari, AR .

NATURE MATERIALS, 2003, 2 (10) :661-663

← 1 2 →