A review on current research trends in electrical discharge machining (EDM)

被引：583

作者：

Abbas, Norliana Mohd ^{[1
]}

Solomon, Darius G. ^{[1
]}

Bahari, Md. Fuad ^{[1
]}

机构：

[1] Univ Teknol MARA, Fac Mech Engn, Shah Alam 40450, Malaysia

来源：

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE | 2007年 / 47卷 / 7-8期

关键词：

EDM; ultrasonic vibration; dry EDM; powder additives; dielectric; modeling;

D O I：

10.1016/j.ijmachtools.2006.08.026

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Electrical discharge machining (EDM) is one of the earliest non-traditional machining processes. EDM process is based on thermoelectric energy between the work piece and an electrode. A pulse discharge occurs in a small gap between the work piece and the electrode and removes the unwanted material from the parent metal through melting and vaporising. The electrode and the work piece must have electrical conductivity in order to generate the spark. There are various types of products which can be produced using EDM such as dies and moulds. Parts of aerospace, automotive industry and surgical components can be finished by EDM. This paper reviews the research trends in EDM on ultrasonic vibration, dry EDM machining, EDM with powder additives, EDNI in water and modeling technique in predicting EDM performances. (c) 2006 Elsevier Ltd. All rights reserved.

引用

页码：1214 / 1228

页数：15

共 107 条

[1]

Altpeter F, 1998, VDI BERICHT, V1405, P149

[2]

[Anonymous], 1998, ADV METHODS MACHININ

[3] Formation of a crater in the workpiece on an electrical discharge machine [J].

Bojorquez, B ;

Marloth, RT ;

Es-Said, OS .

ENGINEERING FAILURE ANALYSIS, 2002, 9 (01) :93-97

[4] Analysis, design and experimental results of a high-frequency power supply for spark erosion [J].

Casanueva, R ;

Azcondo, FJ ;

Brañas, C ;

Bracho, S .

IEEE TRANSACTIONS ON POWER ELECTRONICS, 2005, 20 (02) :361-369

[5] Influence of kerosene and distilled water as dielectrics on the electric discharge machining characteristics of Ti-6Al-4V [J].

Chen, SL ;

Yan, BH ;

Huang, FY .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1999, 87 (1-3) :107-111

[6] Study of added powder in kerosene for the micro-slit machining of titanium alloy using electro-discharge machining [J].

Chow, HM ;

Yan, BH ;

Huang, FY ;

Hung, JC .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2000, 101 (1-3) :95-103

[7]

Cogun C., 2004, GAZI UNIVERSITESI MU, V19, P97

[8] Molds surface finishing with new EDM process in air with thermoplastic composite electrodes [J].

Curodeau, A ;

Richard, M ;

Frohn-Villeneuve, L .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2004, 149 (1-3) :278-283

[9]

Dhanik S., 2005, International Journal of Manufacturing Technology and Management, V7, P157, DOI 10.1504/IJMTM.2005.006829

[10] Modeling of a single resistance capacitance pulse discharge in micro-electro discharge machining [J].

Dhanik, S ;

Joshi, SS .

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2005, 127 (04) :759-767

← 1 2 3 4 5 6 7 8 9 10 →