Simplified processing of anode-supported thin film planar solid oxide fuel cells

被引：91

作者：

Basu, RN ^{[1
]}

Blass, G ^{[1
]}

Buchkremer, HP ^{[1
]}

Stöver, D ^{[1
]}

Tietz, F ^{[1
]}

Wessel, E ^{[1
]}

Vinke, IC ^{[1
]}

机构：

[1] Forschungszentrum Julich, Inst Mat & Proc Energy Syst IWV, D-52425 Julich, Germany

来源：

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY | 2005年 / 25卷 / 04期

关键词：

suspension; YSZ; ZrO2; fuel cells; co-firing; sintering;

D O I：

10.1016/j.jeurceramsoc.2004.01.018

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The concept of anode-supported planar solid oxide fuel cells (SOFCs) involves different fabrication procedures and several sintering steps. This contribution is an attempt towards minimizing the number of sintering steps. By adopting an improved technique a pre-firing step was eliminated. Cells obtained following this co-firing technique showed relatively higher power density (similar to1 A cm(-2) at 0.7 V) at an operating temperature of 800degreesC compared to the cells prepared by the conventional technique. In the present investigation, cells as large as10 cm x 10 cm were prepared and characterized following the new co-firing approach. Detailed microstructural, leak-rate testing (gastightness of the sintered electrolyte film) and electrochemical characterizations were carried out. (C) 2004 Elsevier Ltd. All rights reserved.

引用

页码：463 / 471

页数：9

共 12 条

[1] Fabrication of dense zirconia electrolyte films for tubular solid oxide fuel cells by electrophoretic deposition [J].

Basu, RN ;

Randall, CA ;

Mayo, MJ .

JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2001, 84 (01) :33-40

[2]

BASU RN, 2001, P 7 INT S SOL OX FUE, P995

[3]

BUCHKREMER HP, 1998, ADV MANUFACTURING OP, P143

[4]

CHRISTIANSEN N, 2002, 5 EUR SOL OX FUEL CE, P34

[5]

Forthmann R, 1997, ELEC SOC S, V97, P1003

[6] Nickel-Gd-doped CeO2 cermet anode for intermediate temperature operating solid oxide fuel cells using LaGaO3-based perovskite electrolyte [J].

Ishihara, T ;

Shibayama, T ;

Nishiguchi, H ;

Takita, Y .

SOLID STATE IONICS, 2000, 132 (3-4) :209-216

[7] Development and characterization of vacuum plasma sprayed thin film solid oxide fuel cells [J].

Lang, M ;

Henne, R ;

Schaper, S ;

Schiller, G .

JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2001, 10 (04) :618-625

[8]

Rietveld G, 2001, ELEC SOC S, V2001, P125

[9]

SINGHAL SC, 1996, P 17 RIS INT S MAT S, P123

[10] Evaluation of commercial nickel oxide powders for components in solid oxide fuel cells [J].

Tietz, F ;

Dias, FJ ;

Simwonis, D ;

Stöver, D .

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2000, 20 (08) :1023-1034

← 1 2 →