Dispersed phase hold-up in a perforated rotating disc contactor (PRDC) using aqueous two-phase systems

被引：30

作者：

Coimbra, JSR

Mojola, F

Meirelles, AJA

机构：

[1] Univ Estadual Campinas, FEA, Dept Engn Alimentos, BR-13081970 Campinas, SP, Brazil

[2] Univ Fed Vicosa, Dept & Tecnol Alimentos, BR-36571000 Vicosa, MG, Brazil

来源：

JOURNAL OF CHEMICAL ENGINEERING OF JAPAN | 1998年 / 31卷 / 02期

关键词：

liquid-liquid extraction; aqueous two-phase; rotating disc contactor; dispersed phase; hold-up; characteristic velocity;

D O I：

10.1252/jcej.31.277

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

Dispersed phase hold-up and characteristic velocity in a perforated rotating disc contactor were studied using an aqueous two-phase system composed by polyethylene glycol 6000 and dibasic potassium phosphate. The geometrical and operational variables were flow free area of discs, rotating speed and volume flow ratio. Flow free area of discs showed small influence on the hold-up values, It was also observed the increase of the holdup on the rotating speeds and phase flow ratios.

引用

页码：277 / 280

页数：4

共 15 条

[1] Albertsson P. A., 1960, PARTITION CELL PARTI
[2] BHAWSAR CMB, 1994, CHEM ENG J, V55, pB1
[3] Coimbra JD, 1995, BIOSEPARATION, V5, P259
[4] INFLUENCE OF POLYMER MOLECULAR-WEIGHT AND TEMPERATURE ON PHASE-COMPOSITION IN AQUEOUS 2-PHASE SYSTEMS
FORCINITI, D
HALL, CK
KULA, MR
[J]. FLUID PHASE EQUILIBRIA, 1991, 61 (03) : 243 - 262
[5] Gayler R., 1953, T I CHEM ENG-LOND, V31, P57
[6] PROTEIN RECOVERY USING 2-PHASE SYSTEMS
HUSTEDT, H
KRONER, KH
MENGE, U
KULA, MR
[J]. TRENDS IN BIOTECHNOLOGY, 1985, 3 (06) : 139 - 144
[7] ENZYME AND PROTEIN MASS-TRANSFER COEFFICIENT IN AQUEOUS 2-PHASE SYSTEMS .2. YORK-SCHEIBEL EXTRACTION COLUMN
JAFARABAD, KR
PATIL, TA
SAWANT, SB
JOSHI, JB
[J]. CHEMICAL ENGINEERING SCIENCE, 1992, 47 (01) : 69 - 73
[8] KRONER KH, 1989, SEPARATIONS USING AQ
[9] Kula M R, 1990, Bioseparation, V1, P181
[10] A UNIFIED CORRELATION FOR THE PREDICTION OF DISPERSED-PHASE HOLD-UP IN LIQUID-LIQUID-EXTRACTION COLUMNS
KUMAR, A
HARTLAND, S
[J]. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 1995, 34 (11) : 3925 - 3940

← 1 2 →