Shape optimization for absorber plates of solar air collectors

Solar air heaters can be used for many applications at low and moderate temperatures. There are different factors affecting the solar air heater efficiency, e.g. collector length, collector depth, type of absorber plate, glass cover plate, wind speed, etc. The absorber shape factor is the most important parameter in the design for any type of solar air heater. Increasing the absorber shape area will increase the heat transfer to the flowing air, but on the other hand, will increase the pressure drop in the collector, this increases the required power consumption to pump the air flow crossing the collector. It was most important to find the optimizing angle of the triangular collector. The effect of the change of the absorber shape factor on the collector performance was studied. A theoretical model was constructed for the two types of collectors, taking into account the new parameter, called the absorber shape factor. The results can be used for all types of solar air heaters by changing the value of the absorber shape factor. The optimum angle of the triangular collector was deduced. (C) 1998 Published by Elsevier Science Ltd.