On-line concentration and separation of proteins by capillary electrophoresis using polymer solutions

Proteins were separated in 0.6% poly(ethylene oxide) (PEO) solutions using a capillary filled with buffers prior to analysis and were detected by laser-induced native fluorescence using a pulsed Nd:YAG laser. PEO solutions entered the capillary by electroosmotic how (EOF) during the separation. The composition and concentration of the buffer affected the adsorption of PEO molecules on the capillary surface and, consequently caused changes in the EOF. Short separation times (<7 min) were achieved on a sample solution of five proteins in a 0.6% PEO solution containing 5 mu g/mL ethidium bromide using a capillary pre-filled with 100 mM TRIS-borate (TB) buffers (pH 10,0). We also extended this method for on-line concentration and separation of proteins. Proteins dissolved in low-conductivity media stacked in both TB buffers and in PEO solutions. The peak height was proportional to the injection volume up to 2.1 mu L using an 80-cm capillary filled with 400 mM TB buffers. Using large injection volumes (2.1 mu L), are achieved a limit of detection (S/N = 3) of 31 pM for carbonic anhydrase, which was a 1696-fold sensitivity enhancement compared to a conventional injection method (1 kV for 10 s). In high-conductivity media (urine matrix), stacking occurred at the boundary between the sample zone and PEO solutions. A urine sample without any pretreatment was analyzed, and after stacking, several peaks were detected. Spiking the urine sample with human serum albumin (HSA) affected the fluorescent intensity of some analytes as a result of interaction with HSA.