Modeling fluid transfer along California faults when integrating pressure solution crack sealing and compaction processes

[1] Several models pertaining to earthquake cycles imply intermittent fluid flow through fault. During the interseismic period, increase in fluid pressure from hydrostatic to lithostatic values is a crucial parameter in mechanisms leading to earthquakes. To achieve such pressures, geodynamic processes (gouge compaction, fluid flow) and changes in permeability are required. Previous models have postulated that changes in permeability (by self-healing) are faster than the effects of geodynamic processes. We consider the different mechanisms and rates of crack sealing near active fault on the examples of uplifted Californian faults. We find that natural crack sealing is normally not achieved by a rapid self-healing process. Pressure solution, with mass transfer from solution cleavage to cracks, appears to be a more important mechanism for crack sealing and creep during postseismic deformation. The geometry of transfer path and experimental data have been used to model crack sealing rates by pressure solution which are estimated to be rather slow, similar to the recurrence time of some earthquakes. Such slow changes in permeability may be crucial factors in controlling the increase in fluid pressure and, consequently, the mechanism of critical failure in faults. Then, numerical modeling of fluid pressure and transfer around active faults has been performed integrating a slow change in permeability by crack sealing, gouge compaction, and fluid flow from depth. This modeling shows various location and evolution of fluid overpressure during the interseismic period depending on these processes and allows one to estimate the amount of fluid transferred from depth during interseismic periods.