Acrylate copolymer/ultraviolet curable oligomer blends as pressure-sensitive adhesives

For the blends of acrylate copolymor [poly(2-ethylhexyl acrylate-co-acrylic acid); P(2EHA-AA)] with ultraviolet (UV) curable oligomer [urethane acrylate oligomer; UAO], pressure-sensitive adhesive( PSA) properties, such as peel adhesion, probe tack, and holding power were examined. The values of peel adhesion and probe tack of the P(2EHA-AA)/UAO blends were dramatically reduced by UV irradiation. On the other hand, all blends had a high holding power even if these blends were cured by UV irradiation. The mechanism of reduced PSA properties was investigated I ia dynamic mechanical properties, DSC, and dynamic contact angle (DCA). The peel adhesion decreased monotonically with increasing storage modulus, E', and loss modulus, E ", for all non-UV and UV-cured blends, Since modulus values and glass transition temperatures, Tg, of these blends after UV irradiation were higher than those of these blends before UV irradiation, we judged that the reduced peel adhesion and probe tack values were caused by the modulus increase and the Tg increase due to UV irradiation. In other words, the ability of the deformation energy of UV-cured blends to influence the adhesive tests was reduced by the curing process, The DCAs of non-UV-cured blends were the same as those of UV-cured blends. We presumed that the segment mobility of the polymer chain on the surface did not contribute to the reduced peel adhesion and probe tack values.